Advertisement
FEATURES / OPERATION
Dead Band is used for automatically changing the HVAC system modes from Heat to Cool or
Cool to Heat. If the room temperature keeps going in the opposite direction from the current
mode and exceeds the Dead Band temperature, the Kenmore Smart Thermostat will automati-
cally switch to the alternate mode. Example: The Dead Band is set to 5° F and the thermostat is
set to Cool mode at 70°F. If the room temperature drops down to 65°F, the system will switch
from Cool to Heat mode. The Kenmore Smart Thermostat can set the dead band from 2°F – 5°F
(2.5°C – 6°C).
Filter
Enter Filter setup by pressing Menu / Select.
You can set the number of hours before the thermostat will remind you to install a new filter.
There is a selection for 300, 500 and 700 hours. You can also reset the count to zero when you
change the filter.
Key Lock
To lock the keys and prevent them from being used, hold Up and Down together for 2 seconds.
A lock icon will appear. To unlock the keys for use, repeat the same process, the lock icon will
disappear.
Remove Thermostat from Customer Assurelink Account
Press the Reset button on the bottom of the thermostat with a paper clip. When all the icons are
visible on the screen, press Up & Down for 2 seconds. Use the Up and Down keys to select the
"Yes" or the "No". Now press Menu/Select. If you selected "No", the thermostat will return to the
Main Screen. If you selected "Yes", the "ReqDelete" screen will appear for 3 seconds, then the
Main Screen will return. The thermostat has been removed from the customer's online Assurelink
account.
CLEANING / MAINTENANCE INSTRUCTIONS
When the low battery icon is ON, replace the batteries immediately. Don't leave any used up
battery in the thermostat. The chemical leakage of drained batteries may damage the thermo-
stat and cause it to malfunction.
P 8
Advertisement
