Height Adjustment - Joie spin 360 GT Instruction Manual

Height Adjustment

for Head Support and Shoulder Harnesses
see images -
17 19
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to 17
!
When used rear facing, the
shoulder harness height must be
even with child's shoulders.
!
When used forward facing, the
shoulder harness height must be
even with child's shoulders.
2. Squeeze the head support
adjustment lever , meanwhile
18
pull up or push down on the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
19
15
17
17
18
17
19
.
Using in the Rear Facing Mode
(Rearward Facing Mode/for Child under 18kg
/infant - 4 years old)
Seat installation
see images
!
Please install the child restraint on
the rear vehicle seat, and then put
the child in the child restraint.
Preparation for use
see images
1. Press the ISOFIX adjuster button
-1 and pull the base back from
20
2
the vehicle seat.
2. Press the rotating button to rotate
for easier side loading/unloading
1
of the child.
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
!
The load leg must be installed
correctly with green indicator.
23 -2
20
-
3 9
21
-
20 23
22
&
21 22
-1
23
23
2
1
1
2
16