Sealey GSS2323 Instructions Manual page 8

GardenShed
Step 2:
Assemble the rear wall panels (continued)
Step 2: Assemble the rear wall panels (continued)
Now fit parts 26I, 26H (top channels) and parts 26C, 26D (bottom channels) to the sheeting by tapping it in (diagram A) or sliding it
Now fit parts 26I, 26H (top channels) and parts 26C, 26D (bottom channels) to the sheeting by tapping it in (diagram A) or sliding it in (diagram
in (diagram B). Make sure the small lip on the channel is always facing out. This ensures rain water cannot build up inside your shed.
B). Make sure the small lip on the channel is always facing out. This ensures rain water cannot build up inside the shed. Make sure part 26I and
26H are used as top side channels.
Make sure part 26I and 26H are used as top side channels.
ROOF TOP EDGE
26I
© Jack Sealey Limited
2.3 x 2.3 x 2.4m
ROOF TOP EDGE
26I
9F
RIDGES FACING UP
9F
26C
Original Language Version
26H
9F
9F
26C
A
A
26H
9F
9F
B
B
RIDGES FACING UP
26D
26D
GSS2323/G | Issue:2(SP) 13/04/17