Eurotron MicroCal P200 Series Instruction Manual page 41

Instruction Manual MM850470 ed.1a
Eventually, even from Offline button, it is possible to set the serial port parameters from Options. When necessary,
select the options "Delete measure after download" or "Delete all measure before upload"
Delete All Measure after DownLoad
Select this option to delete, from the calibrator memory, all Tags' calibration results after the data transfer in the
CalpMan 2000 data base.
The previous saved procedures will remain in the Calibrator memory.
Delete All Measure before UpLoad
Select this option to delete, from the calibrator memory ALL OFF-LINE data. Deleted data include: Tag calibration
results "as found" + "as left", Tag definition, and Calibration procedures.
Delete Procedure Memory
Press this key to delete, from the calibrator memory ALL OFF-LINE data. Deleted data include: Tag calibration results
"as found" + "as left", Tag definition, and Calibration procedures
NOTE: , " " E U M . ( .6.1)
AFTER UPLOADING DATA OF A CALIBRATION PROCEDURE IT IS POSSIBLE TO FIND RELATED FILES IN PROC FOLDER FROM AN XPLORER WINDOW OF TILITIES ANAGER SEE PAR
41