Control Panel; Contents - Toshiba TLP-X10U Owner's Manual

Names of each part on the main unit (continued)

Control panel

AUTO KEYSTONE button
To correct the keystone distortion of the picture automatically.
AUTO SET button
AUTO AUTO
KEYSTONE SET
To adjust the image of the RGB input automatically.
VOL/ADJ buttons
VOL/ADJ.
To set and/or adjust values on the menu.
To adjust volume when the menu is not displayed.
To select page and/or thumbnail in the memory card operation.
Selection button
ENTER button
ENTER EXIT
EXIT button
MENU button
INPUT
MENU
INPUT button
ON/STANDBY
To select the input source.
ON/STANDBY button
TEMP LAMP ON
To turn the projector on or off (standby).
BUSY FAN
ON indicator
FAN indicator
LAMP indicator
TEMP indicator
BUSY indicator
33
32
30 41 48 54
To display the menu screen and/or select the
operation on the menu screen.
Also use the selection button, ENTER button and
EXIT button to operate the memory card.
Use the selection button and EXIT button to
enlarge the image. 36
29
28 31
28 82
28
To indicate the status of the
28 82
projector.
82
41
12

CONTENTS

48 54
41
Continued