Advertisement
Installing the HD NVR Analytics Kit
To use some of the Avigilon Control Center (ACC) 6.0 video analytics features, you need to install the
recommended graphic processing unit. The GPU board is used to process video and analytics data managed
by the ACC™ software.
After the GPU has been installed, you can download, install and run the latest version of the Avigilon Control
Center™ software.
Installing GPU into HD-NVR3-PRM or HD-NVR3-STD
Installing GPU into HD-NVR2
Installing GPU into HD-NVR3-PRM or HD-NVR3-STD
1. Make sure the recorder is turned off.
All network, power and peripheral cables are disconnected from the recorder.
l
It is recommended that you use a static mat or static strap to ground yourself against static shock.
l
2. At the top of the recorder, unlock the latch release then lift and rotate the latch towards the back of the
recorder.
The cover slides back and is released from the recorder body.
Installing the HD NVR Analytics Kit
1
4
1
Advertisement
Table of Contents
Related Manuals for Avigilon HD NVR Series
Summary of Contents for Avigilon HD NVR Series
- Page 1 The GPU board is used to process video and analytics data managed by the ACC™ software. After the GPU has been installed, you can download, install and run the latest version of the Avigilon Control Center™ software.
- Page 2 3. At the back of the recorder, locate where the GPU needs to be installed. For HD-NVR3-PRM and STD, the GPU needs to be installed on riser 2 - slot 5 (or the middle slot on the riser). 4. Lift the blue expansion card latch out of the recorder. 5.
- Page 3 7. Push the blue expansion card latch back into place. 8. Close and lock the recorder cover. 9. Reconnect all the cables to the recorder. 10. Power the recorder. Installing GPU into HD-NVR3-PRM or HD-NVR3-STD...
- Page 4 14. Right-click GPU Configuration Tool.exe and select Run as administrator. Allow the installer to run and finish. After the GPU has been installed, you can download, install and run the latest version of the Avigilon Control Center software. Installing GPU into HD-NVR2 1.
- Page 5 3. At the back of the recorder, locate where the GPU needs to be installed. For HD-NVR2, the GPU needs to be installed on riser 2 - slot 2 (or the top slot on the riser). 4. Lift the blue expansion card latch out of the recorder. 5.
- Page 6 7. Push the blue expansion card latch back into place. 8. Close and lock the recorder cover. 9. Reconnect all the cables to the recorder. Installing GPU into HD-NVR2...
- Page 7 Corporation. . Other names mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™ and ® in proximity to each trademark in this document is not a disclaimer of ownership of the related trademark. Avigilon Corporation protects its innovations with patents issued in the United States of America and other jurisdictions worldwide: avigilon.com/patents.
Need help?
Do you have a question about the HD NVR Series and is the answer not in the manual?
Questions and answers