Installation; Assembling The Controller - NEC M120 Setup Manual

Storage unit
Table of Contents

Advertisement

Installation

Perform the installation safely by reading the following safety precautions.
4-1

Assembling the controller

Install optional components if they are not already mounted in the controller. If they are all mounted, go to 4-2.
In the case you install an optional controller to a single controller model, be sure to install it AFTER finishing all
configuration of the Disk Array Unit as a single controller model.
3-2-3 Assembling the Controller
Step 1
Installing host port cards, mezzanine cards and cache memories
Install host port cards, mezzanine cards and cache memories into the Disk Array Unit..
3-2-3-1 Removing or Installing a controller
3-2-3-2 Installing a host port card and mezzanine
3-2-3-3 Installing a cache memory
Installing SFP modules (only for FC ports)
Step 2
Install SFP modules into FC ports or iSCSI Optical ports.
3-2-3-4 Installing an SFP (only when a host port card is optical)
・ No extra lock screw is provided with the controller.
So, keep the removed screws in a safe place until the next time you use them.
・ After installing optional components, be sure to firmly attach the ejector to the controller by using the
lock screws. Otherwise, there is a possibility that a failure or malfunction occurs in the controller.
・ SFP module is a precision component. Protect it from any shock or vibration.
・ When connecting cables, remove and store the dustproof cover.
・ There are two types of SFP modules: 16Gb FC and 32Gb FC.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M320M320f

Table of Contents