Upgrading Firmware - Crestron DM-RMC-100-STR Supplemental Manual

To control the display of the LEDs, do the following:
1. In the navigation bar, click Device. The Device page, which includes a Display
2. In the Display section of the page, do either of the following:

Upgrading Firmware

To upgrade firmware of the DM-RMC-100-STR, do the following:
1. In the navigation bar, click Device. The Device page, which includes a Firmware
2. To upgrade the firmware, click the Upload firmware file radio button or the Use
Supplemental Guide – DOC. 7846A
section, opens.
Device Page—Display
•
To enable the display of the LEDs, click the Enabled radio button if it is not
already selected. By default, the LEDs are enabled.
•
To disable the display of the LEDs, click the Disabled radio button.
Although the LEDs become disabled, the DM-RMC-100-STR continues to
function.
section, opens.
Device Page—Firmware
As shown above, the Firmware section displays the following information about the
DM-RMC-100-STR:
•
Model, which is DM-RMC-100-STR
• Serial Number
•
Firmware Version
service port radio button:
•
If the Upload firmware file radio button is selected, do the following:
a. Click the Browse... button.
b. Locate and select the desired firmware file (*.img), and then click
the Open button. The Browse... field displays the firmware
filename.
DM-RMC-100-STR: HD Streaming Receiver • 19