Summary of Contents for oticon Charger 1.0 miniRITE R
Page 1
Instructions for use Charger 1.0 miniRITE R Oticon Opn S™ Oticon Opn Play™ Oticon Ruby...
Page 2
Introduction to this booklet Intended use This booklet guides you on how to use and maintain your new charger. Intended use The charger is intended to recharge hearing aids that contain Please read the booklet carefully, including the Warnings section. This will rechargeable batteries.
Table of content About Charger Temperature conditions Start up Prepare charger Charge the hearing aids Charging time Handling Caring for your charger Power the charger using other sources Warnings Warnings More info Troubleshooting Charger: Conditions of use Warranty...
Charger Temperature conditions What it is and does Temperature Charging condition Below +5°C No charging due to low temperature USB plug +10°C to +35°C Best charging condition. Charging will take up to 3 hours. Insert in power plug or Charging ports other power sources For hearing aids when +5°C to +10°C and...
Prepare charger Charge the hearing aids Connect to power source Charger is on Place hearing aids in charger Charging 1. Insert the USB plug into the power When the charger is connected to power, Place the hearing aids in the charging The hearing aids LEDs will turn on when plug.
Charging time Ensure you fully charge your hearing aid before first time use. The charging process will automatically stop when the battery is fully charged. Leave the hearing aid in the charger when you do not use it. Charge your hearing aid every night. That ensures you start your day with a Remember to keep the charger connected to a power source.
Caring for your charger Power the charger using other sources Always make sure that the charger is dry and clean before use. Keep the It is possible to power the charger from other sources with a USB port. charging ports clean for dust using a dry cloth. Do not use water or cleaning Ensure that the power source is USB 2.0 compliant, minimum 500mA output.
Warnings For your personal safety and to ensure correct Choking hazards Connection to external equipment usage, you should familiarise yourself fully Charger, hearing aids and their parts should The safety of the use charger when with the following general warnings before be kept out of reach of children and anyone connected to external equipment with an using your charger.
Troubleshooting Symptom Possible causes Solutions Verify that the power supply is connected correctly The charger LED remains turned off when the The charger is not turned on Always control charging starts up to make sure the power source delivers sufficient output for your charger is connected charger to power...
Page 10
Troubleshooting Symptom Possible causes Solutions The charger is not turned on Verify that the charger power supply is connected correctly The hearing aid or charger is either too warm or too cold Move the charger and hearing aid to a location with a temperature between +5 °C to +40 °C Hearing aid LED remains off when the hearing aid Charging is incomplete.
Charger: Conditions of use Warranty Certificate Operational Temperature: +5°C to +40°C environment conditions Humidity: 5% to 93%, non-condensing Name of owner: ___________________________________________________________ Atmospheric pressure: 700 hPa to 1060 hPa Hearing care professional: ___________________________________________________ Transportation and Temperature and humidity shall not exceed the below limits storage conditions for extended periods during transportation and storage: Hearing care professional’s address: ___________________________________________...
Page 12
International warranty Your charger is covered by an international that goes beyond the clauses of this The manufacturer declares that this Declaration of Conformity is available from charger is in compliance with the essential the manufacturer. limited warranty issued by the manufac- limited warranty.
Page 13
Description of symbols and abbreviations used in this booklet Description of additional symbols used on labels Warnings Keep dry Text marked with a warning symbol must be read before using the device. Indicates a medical device that needs to be protected from moisture. Manufacturer Caution symbol The device is produced by the manufacturer whose name and address are stated next to the...
Need help?
Do you have a question about the Charger 1.0 miniRITE R and is the answer not in the manual?
Questions and answers