Using Picture-In-Picture - Optimum DVR FOR iO TV Getting Started

CV2008-878 DVR V3.0:08-878 DVR V3.0 10/3/08
Copy a Recording to a VCR Tape
1. Connect the VCR to the OUT 2 connection
on the back of the DVR for iO TV. See page
11 for more information.
2. Make sure that a tape is in your VCR and
that the VCR is ready to record.
3. Press DVR . The Recorded List
screen appears.
4. Press Move Up or Move Down
to highlight the recording you want to copy
to the VCR. Make sure to select a program
that is not currently being recorded.
5. Press SEL . The Recorded Program
Options screen appears.
6. Press Move Up to highlight "Copy
to VCR."
7. Press SEL . The Copy to VCR
screen appears.
8. Make sure your VCR is properly connected
to your DVR for iO TV outputs, and press Record
on your VCR.
A
9. Press Start copy . The recording begins copying to the VCR tape.
The Recorded List displays the VCR symbol
that is copying to the VCR.
Note: You can watch the copying in progress through the PIP.
12
4:49 PM Page 12

USING PICTURE-IN-PICTURE

Activate PIP on Your TV
While watching a program, press PIP On-Off
Recorded List to activate the PIP screen.
"Design On A Dime"
Notes:
Save: Until I erase
• To pause or record the video in the PIP
Recorded Programs Date Time Length
World Soccer Wed 11/10 4:10am 30min
Extreme Homes Wed 11/10 8:10pm 50min
Design On A Dime Mon 11/15 12:00pm 30min
Home Matters Sun 11/14 12:30pm 30min
Thirteen Days Mon 11/8 8:00pm 1hr 30min • You can only use the dedicated DVR for iO
Options/Play Scheduled Recordings Preferences
• To change the channel in the PIP screen,
Recorded Program Options
"Design On A Dime"
Recorded: Mon 11/15
12:00pm 30min
Tip: While the PIP screen is activated, press
Save: Until I erase
INFO
Options
Erase
Change save time both the Main screen and the PIP screen.
Copy to VCR
Play "Design On A Dime"
Block "Design On A Dime"
Activate PIP from the Channel Guide
Choose highlighted item Recorded List
From the Channel Guide, press Exit
Guide
then press PIP On-Off
Copy to VCR
can only activate PIP from full-screen video.
"Design On A Dime"
Recorded: Mon 11/15
12:00pm 30min
Swap the Main and PIP Screens
Save: Until I erase
To swap the TV program that is in the PIP
Connect VCR inputs to cable box outputs OUT2/VCR.
Place a blank tape in your VCR.
Set your VCR input to record from the cable box.
screen to the Main screen, press PIP Swap
Press RECORD on your VCR.
Start copy Cancel copy
Note: You will only hear the audio for
the program shown in the Main screen.
Move the PIP Screen
To move the PIP screen clockwise to a different corner of the Main screen,
press PIP Move
of the Main screen.
for the recording
screen, you must first swap it to the Main
screen, by pressing PIP Swap .
TV keys (Pause, Rewind, Fast-Forward) to
control the program shown in the Main screen.
use PIP CH+ and PIP CH- .
to display channel information for
or
to close the Channel Guide, and
to activate PIP. You
.
. You can move the PIP screen to any of the four corners
PIP Main
Screen Screen
PIP Main
Screen Screen
13