10.1 Handset connection box (NQE-1845/1846/1847B)
There are three types of handset connection boxes: a waterproof flush mount type for a
wing console (NQE-1845), a waterproof wing installation type (NQE-1846) and an indoor
flush mount type (NQE-1847B).
Close the water-resistant cap of the waterproof type handset box after use.
and sea breeze could cause connector malfunction.
handset above deck.
1
2
Waterproofed
flush mount type
for wing console
(NQE-1845)
■
■
Procedure
1 1
. .
1
.
In the case of the waterproof type, remove the water-resistant cap.
2 2
. .
2
.
Connect the handset (NQW-980) to the connector.
3 3
. .
3
.
Turn ON the switch to start communications.
The access right is obtained by turning on this switch.
(This switch is equivalent to hook switch of the handset.)
Note
•
Always turn off the switch when not in use.
•
Even if the switch is turned on, while another controller with higher priority is in use,
the access right will not be obtained.
10. OPTIONS OPERATION
3
1
2
Waterproofed
wing installation type
(NQE-1846)
CAUTION
3
1.
Connector
2.
Switch
3.
Waterproof cap
Options Operation
Also do not leave the
Indoor flush mount type
(NQE-1847B)
Rain
1
2
10-1
Need help?
Do you have a question about the JHS-800S and is the answer not in the manual?
Questions and answers