Toshiba WIRELESS LAN MODULE GN-1050 Operator's Manual page 34

1 SETTING UP WIRELESS NETWORK
3
Specify the following items and press the [NEXT].
TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
4
Confirm the settings and press the [FINISH].
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
5
Press the [YES] to shutdown the equipment.
The wireless settings apply after restarting the equipment.
32 Setting Up the Infrastructure Mode