Spin Master Dr. Pimple Popper Pimple Pete Manual

CONTENTS:
1 x Pimple Pete Head
1 x Spinner Base
18 x Pimples
1 x Mega-Zit Plunger
For more instructions go to
http://spinmastergames.com/pimplepete
ASSEMBLY
1. Assemble Pimple Pete
Snap Head into Base.
2. Load Pimples
A. Randomly push tail of Pimples through the front of the face.
B. Pull the tail of the Pimples from the back of the face.
Place any extra Pimples back in the box.
C. The Pimples should look like this.
3. Fill Mega-Zit Plunger
Insert tip in water.
4. Installing Mega-Zit Plunger
Plunger Holder
Pull back the Plunger Holder
until it locks in place.
Pull Plunger to
draw in water to
the Fill Line.
Insert Plunger into the
Plunger Holder and press
down until it CLICKS.
A
Fill Line
Press down on the RED
Plunger Lock Release Button
when ready to play.
AGE
5+
WARNING:
!
CHOKING HAZARD — Small parts.
Not for children under 3 years.
B
C
Press down on the
Plunger Lock Release Button
when ready to play.
NOTE: After pressing the Plunger Lock
Release Button, the Mega-Zit is ready for play.
Too much movement may cause it to burst.
2+
PLAYERS
RED