Table of Contents
Advertisement
Note
Avoid leaving any operating dehumidifier unattended.
Display of
It displays "Hi" if the humidity is higher than 85 %
Recommend to have a regular inspection on the dehumidifier by a Qualified Person.
humidity
and display "Lo" if the humidity is less than 24 %
[
] When indicator flashes and error code "11"
Check
prompts, check the following:
When unit is tipped over.
1 Unplug the power plug.
2 Set the unit back upright
Display of
It displays "Hi" if the humidity is higher than 85 %
(wipe away any spilled water).
humidity
and display "Lo" if the humidity is less than 24 %
3 Let the unit stand for half a day or more without
using it. (to dry the unit inside completely in
[
] When indicator flashes and error code "11"
case any water has spilled inside)
Check
4 Insert the power plug again and restart the unit.
prompts, check the following:
Does the unit tilt?
When unit is tipped over.
→ Unplug the power plug and then reconnect it.
1 Unplug the power plug.
Is magnet or metal placed atop the machine?
2 Set the unit back upright
→ Remove magnet or metal object,
(wipe away any spilled water).
Unplug the power and then reconnect it.
3 Let the unit stand for half a day or more without
using it. (to dry the unit inside completely in
When the [
Full
case any water has spilled inside)
is full of water. All functions won't be able to work if the tank remains full.
4 Insert the power plug again and restart the unit.
[
] When Defrost indicator is flashing, the unit is defrosting.
Does the unit tilt?
Defrost
→Only the Power off/ on button works. Other buttons will be disabled.
→ Unplug the power plug and then reconnect it.
Is magnet or metal placed atop the machine?
Power off mildew prevention:
Mildew
→ Remove magnet or metal object,
The product may run 3 minutes in fan mode after operation stopped (by manual or timer
prevention
Unplug the power and then reconnect it.
settings) to dry its internal side for mildew prevention. Press Power off/on key when in this
mode to cancel this function.(P.S.1)
This function may not get enabled due to compressor operation time.
] When Full Tank indicator is flashing, it indicates that the tank is full of water or not
[
Full
P.S.1 When compressor operates more than 10 minutes.
placed in the correct position, all operations will stop automatically if the tank is not emptied
or placed back. When the tank is full of water, LCD backlight will be in red for around 10
To prevent you from forgetting to swtich off the unit, operation will stop automatically if no
Protection
seconds and thens goes off.
button is pressed for 24 hours.
If room temperature is higher than 32 °C, the air volume will increase automatically in order to
[
] When Defrost indicator is flashing, the unit is defrosting.
protect the unit.
Defrost
The unit should be operated within an indoor temperature range of 5~35 °C. Operation out of
→Only the Power off/ on button works. Other buttons will be disabled.
this range may cause some undesired problem.
The unit will stop operation when power failure occurs, and return to standby mode after power
Power off mildew prevention:
Mildew
recovery. To ensure compressor life, do not operate within 3 minutes after switching off the unit.
The product may run 3 minutes in fan mode after operation stopped (by manual or timer
prevention
settings) to dry its internal side for mildew prevention. Press Power off/on key when in this
In case there is foreign matter, water, or dust entered your product or you press and hold on or
Safety
mode to cancel this function.
more of its keys for 17 seconds the safety protection mode begins. Its original use status
protection
This function may not get enabled due to compressor operation time.
retains. No other key, except the "
The safety protection mode may run up to 10 hours and then auto power off (or by pressing
"
" key).
To prevent you from forgetting to swtich off the unit, operation will stop automatically if no
Protection
Once "
button is pressed for 24 hours.
your hand from the product to exit this mode.
If room temperature is higher than 32 °C, the air volume will increase automatically in order to
protect the unit.
The unit should be operated within an indoor temperature range of 7~40 °C. Operation out of
this range may cause some undesired problem.
The unit will stop operation when power failure occurs, and return to standby mode after power
The dehumidifier is used for daily life, such as the removal of unplesant humidity and laundry
recovery. To ensure compressor life, do not operate within 3 minutes after switching off the unit.
Comfort
drying. However, if ambient humidity is under 50 %, unit cannot help maintain a comfortable
humidity environment.
In case there is foreign matter, water, or dust entered your product or you press and hold on or
Safety
more of its keys for 17 seconds the safety protection mode begins. Its original use status
˜Standby
protection
Factory
retains. No other key, except the "Power off/on" key, functions in this mode.
Press
and
default
The safety protection mode may run up to 10 hours and then auto power off (or by pressing
If "00" is displayed, the unit is reset to the factory default.
"Power off/on" key).
＊After resetting to the factory default, all operating modes will be restored to their default settings.
Once "
˜When you stop and start the unit, it will return to the previous mode.
your hand from the product to exit this mode.
Memory
˜If you disconnect and connect the plug again, the unit will return to the previous mode.
function
(Except timed settings)
The dehumidifier is used for daily life, such as the removal of unplesant humidity and laundry
Comfort
Avoid leaving any operating dehumidifier unattended.
drying. However, if ambient humidity is under 50 %, unit cannot help maintain a comfortable
Recommend to have a regular inspection on the dehumidifier by a Qualified Person.
humidity environment.
˜Standby
Factory
Attention
Note
] indicator and the water full display area flash, it indicates that the tank
" key, functions in this mode.
" and "
" indicator light up, remove any foreign matter, water, and dirt or
simultaneously for about 7 seconds to activate.
" and "
" indicator light up, remove any foreign matter, water, and dirt or
Attention
It indicates unit failure when the [
indicator do not flashing
(For example)
Case
There are eleven
fault codes
It indicates unit failure when the [
Please unplug the power plug
indicator do not flashing
immediately, and consult service
(For example)
station to repair the unit.
Case
Please unplug the power plug
immediately, and consult service
station to repair the unit.
Lights up (safety protection mode)
Lights up (safety protection mode)
]
]
There are eleven
fault codes
7
7
YCP23H/YCP28H/YCM33H
YWP33N
Hide quick links:
Advertisement
Table of Contents
