Advertisement

DRAUGHTMASTER
MODULAR 20
USER MANUAL
www.draughtmaster.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MODULAR 20 and is the answer not in the manual?

Questions and answers

Summary of Contents for DraughtMaster MODULAR 20

  • Page 1 DRAUGHTMASTER MODULAR 20 USER MANUAL www.draughtmaster.com...
  • Page 2: Table Of Contents

    CONTENT 1.0 GENERAL 1.1 SAFETY 1.2 SYMBOLS USED IN THIS MANUAL 1.3 DISCLAIMER AND NOTES TO INSTRUCTIONS 1.4 TRANSPORTATION/HANDLING/STORAGE 2.0 DESCRIPTION OF THE M20 SYSTEM 2.1 GENERAL OVERVIEW 2.2 THE SYSTEM 3.0 INSTALLATION AND TAKEN INTO USE 3.1 INSTALLATION 3.2 BEFORE STARTING UP / HANDOVER 3.3 STORAGE OPERATIONS CONDITIONS 3.4 SAFE USE 4.0 MAINTENANCE &...
  • Page 3: General

    1.0 GENERAL 1.2 SYMBOLS USED IN THIS MANUAL 1.1 SAFETY Refer to Appendix A sec. 6.1. The Equipment positioning, installation and disassembly must be carried on by trained and specialized personnel. Personnel must have carefully read and understood equipment user manuals. For installation use standard tools only as listed in this manual.
  • Page 4: Description Of The M20 System

    The installation can contain of an Cleaning equipment, min. one Keg assembly includes a Modular 20 unit (keg module), which is a pressurized plastic vessel (air working pressure Module, Pythons, beer cooler, foam stop and beer boost pump. The installation is mounted on a rack or base 2.8 –...
  • Page 5: Storage Operations Conditions

    4.0 MAINTENANCE & IN- SERVICE 4.1 MAINTENANCE AND INSPECTION 3.3 STORAGE OPERATIONS CONDITIONS Lag of service checks or maintenance according to specifications may lead to failure of the system and/or Always place the kegs away from sources of heat (and sunlight) and in any case at a room temperature parts in the system subject to wear and tear.
  • Page 6 During cleaning the use of detergents with content of chlorine or substances such as thinners, HUMAN INTERFACE: trichloroethylene, ammonia, etc. is prohibited. Beverage Mode: Device is waiting for cleaning IMPORTANT NOTE: or rinsing process by pressing The Operating Instructions for the cleaning module must be clearly read and followed. corresponding button.
  • Page 7: Trouble Shooting

    5.0 TROUBLE SHOOTING 6.0 APPENDIX 5.1 FAILURE INTRO / MODES 6.1 APPENDIX A – UNIT DRAWING/DIAGRAM To manage the Equipment see instructions cards on cleaning modules and keg modules, There is also provide a report to note the date of installation (by Technician) and the cleaning process date (by Customer).
  • Page 8: Appendix B - Copy Of Marking Plate

    6.2 APPENDIX B 6.3 APPENDIX C – EU DECLARATION – COPY OF MARKING PLATE (Placed visible on the equipment)
  • Page 9: Appendix D - Instruction For Changing A Keg

    6.4 APPENDIX D – INSTRUCTION FOR CHANGING A KEG MODULAR 20 INSTRUCTIONS FOR CHANGING A KEG MODULAR 20 SOLVING TECHNICAL PROBLEMS No beer The pressure The cover The beer The beer The beer Beer is The beer is The beer...
  • Page 10: Appendix E - Cleaning Cycle

    6.5 APPENDIX E – CLEANING CYCLE MODULAR 20 CLEANING CYCLE MODULAR 20 SOLVING TECHNICAL PROBLEMS EVERY 6 WEEKS WHEN NECESSARY SCREEN WARNING CAUSES SOLUTION 1. CLEANING PROCEDURE REPLACING THE DETERGENT CONTAINER 1 Place a sign at the tapping point that indicates that a cleaning cycle is in progress.
  • Page 11 DRAUGHTMASTER Carlsberg Breweries A/S 100 Ny Carlsberg vej 1799 Copenhagen V Denmark www.draugthmaster.com...

Table of Contents

Save PDF