Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pool Warehouse Manuals
  4. Swimming Pool
  5. TENNESSEAN
  6. Installation manual

Pool Warehouse TENNESSEAN Installation Manual

Above ground pool
Hide thumbs

Advertisement

Quick Links

Download this manual
TENNESSEAN
Installation Guide
INSTALLER: Once the installation of the pool is complete, it is important
to give this document to the customer in person.
ABOVE GROUND POOL
:
: For your safety, your pool is not designed for diving and/or
jumping in head first. Please do not dive. Diving may
result in permanent injury or death.

Advertisement

loading
Need help?

Need help?

Do you have a question about the TENNESSEAN and is the answer not in the manual?

Questions and answers

Related Manuals for Pool Warehouse TENNESSEAN

Summary of Contents for Pool Warehouse TENNESSEAN

  • Page 1 TENNESSEAN ABOVE GROUND POOL Installation Guide : For your safety, your pool is not designed for diving and/or jumping in head first. Please do not dive. Diving may result in permanent injury or death. INSTALLER: Once the installation of the pool is complete, it is important...

  • Page 2: Installation Instructions

    WARNINGS Installation Instructions 1. Your pool must be level within 1” all around. An un- HOW TO USE THESE INSTRUCTIONS level pool may cause excessive stress on pool frame. This may result in pool failure which could cause Be sure to read these instructions completely before serious personal injury.
  • Page 3 TENNESSEAN ABOVE GROUND ROUND POOL INSTRUCTIONS ABOV E GROU N D POOL SAFET Y FAILURE TO HEED THESE WARNINGS CAN RESULT IN PERMANENT INJURY, WARN I N G PARALYSIS FROM A BROKEN NECK, ELECTROCUTION OR DROWNING. THIS POOL IS NOT DESIGNED FOR DIVING OR JUMPING!

  • Page 4: Local Codes

    TOOLS AND MATERIALS: Local Codes 1. Non-Stretch Twine Check to see if building permits or utility clearances 2. Garden Rake are required. Comply with safety codes regarding 3. Nail -- 2-1/2” Long (12 Req’d) fencing and all electrical codes. 4. 18” Long Wooden Stake (12 Req’d) 5.

  • Page 5: Site Preparation

    SITE PREPARATION 26’ X 15’ A level pool area is a vital part of your pool con- struction. Avoid possible disassembly later by taking your time and making sure the pool area is leveled properly. WARNING An unleveled area my cause excessive stress on the pool’s wall and framework, and may result in pool failure.
  • Page 6 32’ X 16’ 33’ X 18’ 34’ X 18’ 41’ X 21’...
  • Page 7 Step 2 ... Refer to Parts List and exploded view for descrip- tions and parts reference. Step 4...SIDE SUPPORT EXCAVATION 18’ WIDE POOL = 11’ LONG Using a transit to level the pool area is preferred. When using this method, professional assistance is recommended.
  • Page 8 SIDE SUPPORT ASSEMBLY CON’T Step 6...INSTALL CONCRETE BLOCKS Position the top ground support over the bottom ground support and lower it to en- close the bottom ground support. Slide the ground supports Remove string line. Place concrete blocks into into the side vertical until the excavations as shown.
  • Page 9 Step 8...DIG OUT FOR PRESSURE PADS Step 10...INSTALL BOTTOM RAIL LOCATOR Loosely assemble bottom rails (stamped “S”), Dig out a trench to the dimensions shown groove up, between verticals with bottom rail above., grading to the ground support. Use a locators.
  • Page 10 Step 13...CONNECT WALL JOINT Patio Block Installation (optional but recommend- ed): Center 12” x 12” x 2” patio blocks under vertical end caps around ends of pool and mark their posi- tions with a stick. Move bottom framework from ends out of your way in sections.
  • Page 11 Exploded view - Refer to owner’s guide for IF YOUR POOLS EXPLODED VIEW IS NOT SHOWN, PLEASE REFER TO THE PARTS LIST more detailed view. INCLUDED WITH YOUR POOL. Fig. A Side view Fig. B EXTENSION SHOWN IS FOR 54” POOLS ONLY.
  • Page 12 USE THE DIAGRAMS BELOW FOR POOL Step 15... Top Rail Joints SIZES SHOWN. REFER TO THE NEXT PAGE FOR 16’ WIDE OVALS AND 34’x18’ POOLS PLEASE REFER TO DIAGRAMS AT THE BOTTOM OF THE NEXT PAGE FOR RESIN TOP RAIL HOLE INDENTIFICATION. Step 16...
  • Page 13 USE THE DIAGRAM AND CHART INSTALL TOP RAILS - Top Rail Joints continued BELOW ON THIS PAGE FOR 24’x16’, 28’x16’ and 32’x16’ POOLS AND 34’ X 18’ POOLS. HOLE CHART FOR 7” & 9” TOP RAIL POOLS JOINT A JOINT B JOINT C JOINT D 12’, 16’, 18’...
  • Page 14 Step 17... Step 20... ATTACH TOP CONNECTORS Attach top connectors to pool. Refer to your pools ex- ploded view for proper installation for Top connector and skirt if applicable. Secure with screws as shown in detail in your parts list. Step 18...
  • Page 15 Step 22... Step 24... With the liner in position, hold in place by attaching With the help of two or three people, raise and hold two binder clips over folded cardboard on the under- the liner up from any three top rail sections. Remove side of each top rail.
  • Page 16 IMPORTANT: NOTE: At the skimmer and return openings only, Above-ground pools are designed the return hem must be cut away between the steel for swimming and wading only. Diving or Jumping is side wall and the liner side wall. (This will insure that product of mis-use.