Table of Contents
Advertisement
Outdoor
Installation Guide
OHN
OH85N/(LH85OHNSKGB/**)
OH85N-D(K)/(LH85OHNDKGB/**)
OH85N/(LH85OHNSLGB/**)
Follow the instructions provided in this guide when installing the product.
Samsung will not provide warranty coverage for problems that may arise as a result of failure to follow the guide.
The color and shape of the product may vary. In addition, instructions in the installation guide may change without prior notice when
necessary to improve the product.
Advertisement
Table of Contents
Related Manuals for Samsung OHN Series
Summary of Contents for Samsung OHN Series
- Page 1 Follow the instructions provided in this guide when installing the product. Samsung will not provide warranty coverage for problems that may arise as a result of failure to follow the guide. The color and shape of the product may vary. In addition, instructions in the installation guide may change without prior notice when...
-
Page 2: Table Of Contents
Table of contents OH85N/(LH85OHNSKGB/**) Prior to Installation Protection glass: specifications and installation guide --------------------------------------------------------------------------------- Surrounding environment --------------------------------------------------------------------------------- Rotation and tilt angle --------------------------------------------------------------------------------- Clearance for installation --------------------------------------------------------------------------------- Installing the wall-mount --------------------------------------------------------------------------------- Enclosure unit design guide Air flow direction --------------------------------------------------------------------------------- Inlet and outlet types --------------------------------------------------------------------------------- Total open area of the ventilation holes and ratio ---------------------------------------------------------------------------------... - Page 3 OH85N-D(K)/(LH85OHNDKGB/**) Prior to Installation Protection glass: specifications and installation guide --------------------------------------------------------------------------------- Surrounding environment --------------------------------------------------------------------------------- Rotation and tilt angle --------------------------------------------------------------------------------- Clearance for installation --------------------------------------------------------------------------------- Enclosure unit design guide Air flow direction --------------------------------------------------------------------------------- Inlet and outlet types --------------------------------------------------------------------------------- Total open area of the ventilation holes and ratio --------------------------------------------------------------------------------- Precautions for enclosure unit designing ---------------------------------------------------------------------------------...
- Page 4 OH85N/(LH85OHNSLGB/**) Prior to Installation Surrounding environment --------------------------------------------------------------------------------- Rotation and tilt angle --------------------------------------------------------------------------------- Clearance for installation --------------------------------------------------------------------------------- Installing the wall-mount --------------------------------------------------------------------------------- Enclosure unit design guide Air flow direction --------------------------------------------------------------------------------- Inlet and outlet types --------------------------------------------------------------------------------- Total open area of the ventilation holes and ratio --------------------------------------------------------------------------------- Precautions for enclosure unit designing ---------------------------------------------------------------------------------...
- Page 5 KGB/**) OH85N/ (LH85OHNSKGB/**)
-
Page 6: Prior To Installation
• Use a protection glass that can block off at least 50 % of the solar heat the unit receives. Installing the protection glass Samsung guarantees the product’s water and dust resistance performance (IP56). This guarantee, however, does not cover any issues resulted from the choice of non-recommended protection glass or installation method. (Examples: Issues caused by the ingress of dust or humidity from outside or due to insufficient insulation against solar heat, e.g.,... -
Page 7: Surrounding Environment
OH85N/(LH85OHNSKGB/**) Surrounding environment • The airway into and out of the product can be blocked when the inlet (or outlet) is covered by a Covering pile of frozen snow, dust, or tree leaves. Install a structure covering structure to avoid matters piling directly onto the inlet. -
Page 8: Rotation And Tilt Angle
– This product can be installed in Landscape or Portrait orientations. – This product can be installed in a tilted position on a vertical wall or an obstacle, up to 15°. – Contact Samsung Customer Service Center for further details. Wall or... -
Page 9: Clearance For Installation
OH85N/(LH85OHNSKGB/**) Clearance for installation Clearance for installing the product alone When installing the product close to the wall, maintain the clearance ( ) in order to secure air flow. • Clearance from the wall ( ) – Example 1) Atmospheric temperatures under 35 ℃ without direct sunlight: 60 mm or more –... - Page 10 OH85N/(LH85OHNSKGB/**) Clearance for installing with the enclosure unit When installing an enclosure unit close to the wall, maintain the clearance in order to secure air flow. Consult your provider for detailed requirements before installing the product. Excessive heat due to the use of the enclosure unit with an obstacle or a wall may cause a malfunction or a problem with the product.
-
Page 11: Installing The Wall-Mount
OH85N/(LH85OHNSKGB/**) Installing the wall-mount Landscape installation – Do not use the 4 holes on the left as they are NOT mount holes. – Use M8 bolts in the 8 holes for mounting, 4 in the center and 4 on the right. Choose the length based on the mount thickness. -
Page 12: Enclosure Unit Design Guide
OH85N/(LH85OHNSKGB/**) 02 Enclosure unit design guide – Contact our Tech Consulting team for support when you wish to use the product with an enclosure unit. The following provides a basic guide and information for designing an enclosure unit. Air flow direction This product uses cooling fans to take in outside air to lower the internal temperature and discharge the hot air. -
Page 13: Total Open Area Of The Ventilation Holes And Ratio
OH85N/(LH85OHNSKGB/**) Total open area of the ventilation holes and ratio Follow the guide when combining the product with the enclosure unit. – If the instructions provided in this guide are not observed, the cooling system may not work properly and may cause a malfunction, which will not be covered by warranty. -
Page 14: Enclosure Unit Partition Design
OH85N/(LH85OHNSKGB/**) Enclosure unit partition design Partition design guide When using the product with an enclosure unit, add partitions between the inlet and outlet to keep air paths separated. Partitions should fit perfectly inside the enclosure unit, with no gap. If there is a gap, use a foam tape to fill it. Foam tape Partition Single enclosure unit... -
Page 15: N One-Side Unit Design
OH85N/(LH85OHNSKGB/**) 1 x N one-side unit design When designing the 1 x N one-side enclosure unit, add partitions between the products to keep the air paths separated. – Refer to the 'Total open area of the ventilation holes and ratio’ . (Page 13) –... -
Page 16: Handling Guide
– To purchase the Bracket-Hang ( ) and bolts (M8 x L23), contact your provider or Samsung. Landscape Portrait 3. When the product has been brought to the installation 4. -
Page 17: Cleaning And Cautions
OH85N/(LH85OHNSKGB/**) 04 Cleaning and cautions Cleaning Cleaning the protection glass – Consult the manufacturer of the protective glass for cleaning. – The guide for OH85N/(LH85OHNSKGB/**) only applies when the product is used with an enclosure unit that has a protective glass added to the front side. English - 17... - Page 18 OH85N/(LH85OHNSKGB/**) Cleaning the inlet and outlet Use a brush to remove any debris from the inlet and outlet opening. – To remove tough stains, wipe using a cloth with a small amount of ethanol based cleaner. – If washing with water, keep the pressure below 0.5 bar. Check once every 6 months and clean the inlet and outlet if they are covered/blocked by dust and other materials (more than 20 %).
-
Page 19: Precautions
OH85N/(LH85OHNSKGB/**) Precautions Cautions when routing cables • Route cables connected to the product in a manner that keeps them away from water. – The guide for OH85N/(LH85OHNSKGB/**) only applies when the product is used with an enclosure unit that has a protective glass added to the front side. - Page 20 OH85N/(LH85OHNSKGB/**) Before connecting cables – The color and the appearance may differ depending on the product, and specifications are subject to change without prior notice to improve the performance. Unfasten the screws, then remove the cover. Remove the appropriate silicone bar for the thickness of the cable to connect. Different hole sizes and corresponding cable thickness for each –...
- Page 21 OH85N/(LH85OHNSKGB/**) Connecting the power cable – The color and the appearance may differ depending on the product, and specifications are subject to change without prior notice to improve the performance. Make sure that you have a 8.5 mm diameter waterproof power cable that can Distribution withstand 1800 W or higher.
- Page 22 OH85N/(LH85OHNSKGB/**) Cautions when connecting cables • Remove the appropriate silicon bar before connecting cables. – 7 Ø hole: For inserting 7-7.5 Ø cables – 5.5 Ø hole: For inserting 5.5-6 Ø cables – 3 Ø hole: For inserting 3-3.5 Ø cables –...
- Page 23 OH85N/(LH85OHNSKGB/**) • After all the cables are connected, make sure to close the cover and fasten the screws to ensure it is watertight. Cautions when replacing parts • This product is designed to resist water and dust. Do not disassemble the product. –...
- Page 24 OH85N-D(K)/ (LH85OHNDKGB/**)
-
Page 25: Prior To Installation
• Use a protection glass that can block off at least 50 % of the solar heat the unit receives. Installing the protection glass Samsung guarantees the product’s water and dust resistance performance (IP56). This guarantee, however, does not cover any issues resulted from the choice of non-recommended protection glass or installation method. (Examples: Issues caused by the ingress of dust or humidity from outside or due to insufficient insulation against solar heat, e.g.,... -
Page 26: Surrounding Environment
OH85N-D(K)/(LH85OHNDKGB/**) Surrounding environment At least 250 mm from the screen top • The airway into and out of the product can be blocked when the inlet (or outlet) is covered by a pile of frozen snow, dust, or tree leaves. Install a Covering structure covering structure to avoid matters piling directly onto the inlet. -
Page 27: Rotation And Tilt Angle
OH85N-D(K)/(LH85OHNDKGB/**) Rotation and tilt angle – This product can be installed in Portrait orientation, but not in Landscape. – Contact Samsung Customer Service Center for further details. Wall or obstacle Portrait 50 mm or more – Do not use this model installed on a ceiling, floor, or table. -
Page 28: Clearance For Installation
Refer to the image below when installing the Hinge. – Use sets of 6 dedicated M8 bolts for Hinge installation. – To purchase the Hinge and M8 bolts (M8 x L23), contact your provider or Samsung. 5 mm 7 mm –... -
Page 29: Enclosure Unit Design Guide
OH85N-D(K)/(LH85OHNDKGB/**) 02 Enclosure unit design guide – Contact our Tech Consulting team for support when you wish to use the product with an enclosure unit. The following provides a basic guide and information for designing an enclosure unit. Air flow direction This product uses cooling fans to take in outside air to lower the internal temperature and discharge the hot air. -
Page 30: Total Open Area Of The Ventilation Holes And Ratio
OH85N-D(K)/(LH85OHNDKGB/**) Total open area of the ventilation holes and ratio Follow the guide when combining the product with the enclosure unit. – If the instructions provided in this guide are not observed, the cooling system may not work properly and may cause a malfunction, which will not be covered by warranty. -
Page 31: Single Enclosure Unit
OH85N-D(K)/(LH85OHNDKGB/**) Single enclosure unit Design the enclosure unit according to the following specifications to keep discharged hot air from flowing back into the inlet. • Air inlet ( ) Open area of Enclosure Ventilation holes: 100,000 mm or more Ventilation opening ratio (% of total opening): 70 % or more •... -
Page 32: Handling Guide
– To purchase the Bracket-Hang ( ) and bolts (M8 x L23), contact your provider or Samsung. Portrait 3. When the product has been brought to the installation site, unfasten and remove the Bracket-Hang ( ) and bolts. -
Page 33: Cleaning And Cautions
OH85N-D(K)/(LH85OHNDKGB/**) 04 Cleaning and cautions Cleaning Cleaning the protection glass – Consult the manufacturer of the protective glass for cleaning. – The guide for OH85N-D(K)/(LH85OHNDKGB/**) only applies when the product is used with an enclosure that has a protective glass added to the front side. English - 33... - Page 34 OH85N-D(K)/(LH85OHNDKGB/**) Cleaning the inlet and outlet Use a brush to remove any debris from the inlet and outlet opening. – To remove tough stains, wipe using a cloth with a small amount of ethanol based cleaner. – If washing with water, keep the pressure below 0.5 bar. Check once every 6 months and clean the inlet and outlet if they are covered/blocked by dust and other materials (more than 20 %).
-
Page 35: Precautions
OH85N-D(K)/(LH85OHNDKGB/**) Precautions Cautions when routing cables • Route cables connected to the product in a manner that keeps them away from water. – Route cables away from the inlet and outlet. – The guide for OH85N-D(K)/(LH85OHNDKGB/**) only applies when the product is used with an enclosure that has a protective glass added to the front side. - Page 36 OH85N-D(K)/(LH85OHNDKGB/**) Before connecting cables – The color and the appearance may differ depending on the product, and specifications are subject to change without prior notice to improve the performance. Remove screws from the brackets on both sides of the product. Open the auxiliary display ( ).
- Page 37 OH85N-D(K)/(LH85OHNDKGB/**) Connecting the power cable – The color and the appearance may differ depending on the product, and specifications are subject to change without prior notice to improve the performance. Make sure that you have a 8.5 mm diameter waterproof power cable that can withstand 1800 W or higher.
- Page 38 OH85N-D(K)/(LH85OHNDKGB/**) Wiring • Use the enclosed clampers ( ) to securely organize cables as shown in the below images. Main display ( Auxiliary display ( Cautions when connecting cables • Remove the appropriate silicon bar before connecting cables. – 7 Ø hole: For inserting 7-7.5 Ø cables –...
- Page 39 OH85N-D(K)/(LH85OHNDKGB/**) Cautions when replacing parts • This product is designed to resist water and dust. Do not disassemble the product. – If disassembly is necessary due to a malfunction, contact the service center. – The guide for OH85N-D(K)/(LH85OHNDKGB/**) only applies when the product is used with an enclosure that has a protective glass added to the front side.
-
Page 40: Oh85N/(Lh85Ohnslgb/**)
OH85N/ (LH85OHNSLGB/**) -
Page 41: Prior To Installation
OH85N/(LH85OHNSLGB/**) 01 Prior to Installation Surrounding environment • The airway into and out of the product can be blocked when the inlet (or outlet) is covered by a Cover pile of frozen snow, dust, or tree leaves. Install a cover to avoid snow piling directly onto the inlet. Blocked ventilation due to snow or dust covering the inlet or outlet may cause a malfunction. -
Page 42: Rotation And Tilt Angle
– This product can be installed in Landscape or Portrait orientations. – This product can be installed in a tilted position on a vertical wall or an obstacle, up to 15°. – Contact Samsung Customer Service Center for further details. Wall or... -
Page 43: Clearance For Installation
OH85N/(LH85OHNSLGB/**) Clearance for installation Clearance for installing the product alone When installing the product close to the wall, maintain the clearance ( ) in order to secure air flow. • Clearance from the wall ( ) – Example 1) Atmospheric temperatures under 35 ℃ without direct sunlight: 60 mm or more –... - Page 44 OH85N/(LH85OHNSLGB/**) Clearance for installing with the enclosure unit When installing an enclosure unit close to the wall, maintain the clearance in order to secure air flow. Consult your provider for detailed requirements before installing the product. Excessive heat due to the use of the enclosure unit with an obstacle or a wall may cause a malfunction or a problem with the product.
-
Page 45: Installing The Wall-Mount
OH85N/(LH85OHNSLGB/**) Installing the wall-mount Landscape installation – Do not use the 4 holes on the left as they are NOT mount holes. – Use M8 bolts in the 8 holes for mounting, 4 in the center and 4 on the right. Choose the length based on the mount thickness. -
Page 46: Enclosure Unit Design Guide
OH85N/(LH85OHNSLGB/**) 02 Enclosure unit design guide – Contact our Tech Consulting team for support when you wish to use the product with an enclosure unit. The following provides a basic guide and information for designing an enclosure unit. Air flow direction This product uses cooling fans to take in outside air to lower the internal temperature and discharge the hot air. -
Page 47: Total Open Area Of The Ventilation Holes And Ratio
OH85N/(LH85OHNSLGB/**) Total open area of the ventilation holes and ratio Follow the guide when combining the product with the enclosure unit. – If the instructions provided in this guide are not observed, the cooling system may not work properly and may cause a malfunction, which will not be covered by warranty. -
Page 48: Enclosure Unit Partition Design
OH85N/(LH85OHNSLGB/**) Enclosure unit partition design Partition design guide When using the product with an enclosure unit, add partitions between the inlet and outlet to keep air paths separated. Partitions should fit perfectly inside the enclosure unit, with no gap. If there is a gap, use a foam tape to fill it. Foam tape Partition Single enclosure unit... -
Page 49: N One-Side Unit Design
OH85N/(LH85OHNSLGB/**) 1 x N one-side unit design When designing the 1 x N one-side enclosure unit, add partitions between the products to keep the air paths separated. – Refer to the 'Total open area of the ventilation holes and ratio’ . (Page 47) –... -
Page 50: Double-Sided Enclosure Unit
OH85N/(LH85OHNSLGB/**) Double-sided enclosure unit Design the enclosure unit to keep discharged hot air from flowing back into the inlet. • Clearance ( ): 400 mm or more • Air inlet ( Total open area of the ventilation holes: 126000 mm or more Ventilation opening ratio (% of total opening): 70 % or more •... -
Page 51: Handling Guide
– To purchase the Bracket-Hang ( ) and bolts (M8 x L23), contact your provider or Samsung. Landscape Portrait 3. When the product has been brought to the installation 4. -
Page 52: Cleaning And Cautions
OH85N/(LH85OHNSLGB/**) 04 Cleaning and cautions Cleaning Cleaning the protection glass • (areas except the Magic-Glass): Use a clean, soft cloth dampened with water to wipe off the surface. • (Magic-Glass): Wipe off the surface periodically with a clean, soft cloth dampened with water or glass cleaner (cleaning cycle: within 1 month). - Page 53 OH85N/(LH85OHNSLGB/**) Cleaning the inlet and outlet Use a brush to remove any debris from the inlet and outlet opening. – To remove tough stains, wipe using a cloth with a small amount of ethanol based cleaner. – If washing with water, keep the pressure below 0.5 bar. Check once every 6 months and clean the inlet and outlet if they are covered/blocked by dust and other materials (more than 20 %).
-
Page 54: Precautions
OH85N/(LH85OHNSLGB/**) Precautions Precautions regarding the Cover-Cap • Place Cover-Caps in the holes on the top and sides. – Cover-Caps for your product are found enclosed in the package. Cautions when routing cables • Route cables connected to the product in a manner that keeps them away from water. English - 54... - Page 55 OH85N/(LH85OHNSLGB/**) Before connecting cables – The color and the appearance may differ depending on the product, and specifications are subject to change without prior notice to improve the performance. Unfasten the screws, then remove the cover. Remove the appropriate silicone bar for the thickness of the cable to connect. Different hole sizes and corresponding cable thickness for each –...
- Page 56 OH85N/(LH85OHNSLGB/**) Connecting the power cable – The color and the appearance may differ depending on the product, and specifications are subject to change without prior notice to improve the performance. Make sure that you have a 8.5 mm diameter waterproof power cable that can Distribution withstand 1800 W or higher.
- Page 57 OH85N/(LH85OHNSLGB/**) Cautions when connecting cables • Remove the appropriate silicon bar before connecting cables. – 7 Ø hole: For inserting 7-7.5 Ø cables – 5.5 Ø hole: For inserting 5.5-6 Ø cables – 3 Ø hole: For inserting 3-3.5 Ø cables –...
- Page 58 OH85N/(LH85OHNSLGB/**) • After all the cables are connected, make sure to close the cover and fasten the screws to ensure it is watertight. Cautions when replacing parts • This product is designed to resist water and dust. Do not disassemble the product. –...
- Page 59 This page is intentionally left blank.
- Page 60 This page is intentionally left blank.