argon audio Soul Quick Start

Safety

Safety Instructions

•
Do not spill liquids on the product. Clean only with a dry
cloth.
•
Place the unit on a solid surface.
•
Do not leave the product near any heat sources, such as
radiators, heat registers, stoves or other appliances that
produce heat.
•
Protect the power cord from being walked on or pinched,
particularly at plugs and the point where they exit from
the product.
•
During Lightning storms, unplug the product from the
power source or if unused for long periods of time. This
will prevent lightning and power-line surge damage to the
product.
•
Do not attempt to service this product yourself. Opening
or removing covers may expose you to dangerous
voltages or other hazards. Please contact the
manufacturer to be referred to an authorized service
center near you.
w w w . a r g o n a u d i o . c o m
So u l Q u i c k s t a r t
•
Do not overload wall outlets, extension cords, or integral
power circuits as this can result in a risk of fire or electric
shock.
•
Never push any object through the product openings, as
this can result in fire, electric shock or damage.
•
Use proper power sources. When charging, plug the
product into a proper power source, as described in the
operating instructions or as marked on the product.
Quick start
1. Charging: Be sure the headphone is powered off, and
then connect the charging cable to the USB interface of
your PC/Laptop or any other USB power outlet. The LED
will turn red during charging process, and it will turn off
when charging is complete. Please fully charge the
headphone before using it for the first time.
2. Power on and pairing: Press the power button for 3-5
seconds until the LED starts blinking blue and red
alternatively and the headphone says "Power on." The
headphone will then begin to pair automatically, and say
"Pairing". Open Bluetooth settings on your device, find
"Argon Soul" on the list and then click it to pair until the
headphone says "paired". You are now ready to listen to
music!
3. Power off: Press the power button for about 5 seconds
until the headphone says "power off."