Operation
Danger of injury caused by
implosion.
Damage and cracks in jars/twist-off
lids can cause implosion.
Only vacuum jars and lids which are
in perfect condition.
Only vacuum jars on vacuum level 1
or 2.
Damage caused by deformation
of glass lid.
The glass lid may become deformed
due to the negative pressure that
occurs.
Only vacuum seal jars up to a
maximum height of 8 cm in order to
maintain a safety gap of at least
1 cm between the lid of the jar and
the glass lid of the drawer.
24
Vacuuming single use jars and
jars with twist-off lids
Close the jar with its appropriate lid
and rubber seal or with the twist-off
lid.
Open the drawer and the glass lid.
Place the jar in the vacuum chamber.
Switch the drawer on with the
sensor.
The and sensors will light up.
Touch the sensor repeatedly until
the segment for vacuum level 1 or 2
lights up.
Touch the sensor repeatedly until
the segment for sealing level 1 lights
up.
Close the glass lid and press it down
lightly.
The vacuuming process will start.