Related Manuals for Dog Care TC01
Summary of Contents for Dog Care TC01
- Page 1 ® Model: TC01 If any quality problems or confusion, feel free to contact us via +1(833)-220-1900 support@dogcareglobal.com...
- Page 2 120Minutes Complete charging in 2 hours.Offer only one wire in the package. Collar Fitting: Adjust to the comfortable size; make sure the receiver’s contact points are placed snugly against your pet’s skin.
- Page 3 To turn the transmitter on. Security Keypad Lock: Toggle it down to unlock.
- Page 4 Vibrate Command: Press the vibration button briefly and the receiver vibrates once. Beep Command: Press the beep button briefly and the receiver beep once.
- Page 5 Static Intensity Adjustment: Press and hold the LEVEL button while rotating the remote control switch to adjust the shock intensity. Static Command: Press the static button briefly and the receiver shock once. Channel Switching: Able to train 9 dogs at the same time. Press the channel button briefly to select the dog to train.
- Page 6 Pairing: Refer to “Page10”for more information. I. Package Content Remote Control Receiver Collar ® Model: TC01 If any quality problems or confusion, feel free to contact us via +1(833)-220-1900 support@dogcareglobal.com USB Cable Lanyard User Manual Silicone Caps X 2...
- Page 7 Receiver USB Charging Port & Rubber Lid Static Electrodes Sound including Silicone Caps Speaker for electrodes LED Status Light COLLAR STATIC STIMULATION QUICK GUIDE When wearing the collar, it is most suitable if one finger can be insert ed under it. Too tight is not good for your dog, but too loose will dull the static function for the electrodes cannot touch your dog’s skin.
-
Page 8: Remote Control
II.Product Overview Remote Control Antenna ON & OFF Switch / Static Level Regulator Display Screen Keypad Lock Static Button Static Level Regulator Channel Switch / Activation Button Match Button Vibrate Button Beep Button Micro USB Lanyard Holder Charging Port Screen Channel Display ( 1-9) Static Level... - Page 9 III. Setting Up 1. Charge the devices respectively for 2 hours and above. Remote Control: Charge the device until the battery icon on the display indicates full bars. Receiver: Charge the device until the red LED turns green. The display on the Remote will indicate full bars as well.
-
Page 10: Training Modes
When wearing the collar, the tightness is at most fitting if one finger can be inserted underneath. The Silicone Caps can dull the static sensation, you should decide if you need put them on. The soft caps also protect your dog from direct contact with metal electrodes, which in some cases will cause discomfort to some dogs. -
Page 11: Training Tips
VI. Match the Remote Control to the Receiver: *You may skip this step because the set is already paired by factory setting. Connect the Receiver to a power source via the USB cable, matching mode can only be activated during charging. -
Page 12: Important Notice
3. Use verbal commands first, and supplement with a corrective stimulus only as needed. Be consistent with your verbal commands, using the same words every time. Work with your pet on one behavior at a time to avoid confusion and frustration. Use as little stimulus 4. -
Page 13: Troubleshooting
5. Static stimulation is not a pleasant experience for any dogs. Punishment is harsh way to train a dog. Always praise and encourage your dog for good behavior. Note: With Anti-Misoperation design, Static function always cut-off after 4 secs, this is a precaution designed to prevent unintentional long-pressed of the button, and potential animal abuse. -
Page 14: Terms Of Use And Limitation Of Liability
4. Avoid dropping the devices on hard surface or inflict excessive force on them. 5. Avoid using the devices in environment flooded with corrosive chemical, this may lead to color degrading, deforming, or cracking of exterior of the devices. Maintenance: 1. -
Page 15: Product Specification
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. XIII. Product Specification Model TC01 Package Dimension 8.8″ x 5.4″x1.9″ Neck Circumference 9.8″ x24.8″... - Page 16 ® If any quality problems or confusion, feel free to contact us via +1(833)-220-1900 support@dogcareglobal.com...
Need help?
Do you have a question about the TC01 and is the answer not in the manual?
Questions and answers
What is the best static electricity setting for a 27 lb dog
The best static electricity setting for a Dog Care TC01 depends on the dog's individual sensitivity. Factors like size, weight, fur thickness, and skin condition affect the response. The minimum sensation level is "10," but you should adjust it based on your dog's reaction. Start at the lowest level and gradually increase until the dog responds appropriately.
This answer is automatically generated
Why does my collar turn itself off if the remote is not used for several hours?