Clipper Potentiometer (Slider); Unlimited Rotation Data Regulator (Encoder); Electricity Led; Power Switch With Volume Regulator - Miditech K32S Owner's Manual

5. "Shift" + Keyboard's <Transpose -7~0~+7 > : Change to MIDI notes transpose.
6. "Shift" + Keyboard's <Touch Soft ~ Hard > : Change to MIDI notes velocity
curve (normal curve is default ).
7. "Shift" + Keyboard's <Reverb ON/OFF > :Reverb ON/OFF for internal GM
sound.(off~50%~100% : "Shift" LED --- 50% with 100% light GREEN , off light
RED)
8. "Shift" + Keyboard's <Number 0~9 > : Change to GM Sound (1~128 or 211~215)
of MIDI channel 1. For example , change to GM Sound 120 , "Shift" is ON , +
"Number 1" first , "Number 2" second , then "Number 0" , press "Enter" in the
end , "Shift" LED Flash GREEN.
The Number in 1~128 or 211~215 , press "Enter" , "Shift" LED flash correct
color GREEN.
On the other wise , "Shift" LED flash wrong color RED.
9. "Shift" + "OCTAVE DOWN" + "OCTAVE UP" : Hold on these buttons for 2
second . Save the changed parameters. "Shift", "OCTAVE DOWN" and
"OCTAVE UP" LED flash PURPLE.
10. "Shift" + "PAD1" + "PAD2" : Hold on these buttons for 3 second . Reset the
changed parameters. "Shift", "OCTAVE DOWN" and "OCTAVE UP" LED flash
RED.

4.6 Clipper potentiometer (Slider):

The potentiometer can adjust the specific MIDI controller message. K32s send CC
#15Hex.
And send TVF cutoff freq modify for internal GM sound.

4.7 Unlimited rotation data regulator (Encoder):

Unlimited rotation data regulator to send specific MIDI controller message, K32s
send CC #16Hex . When "Shift" is on , change to GM Sound.

4.8 Electricity LED:

When "Rechargeable" Ni-MH batteries installed:
1. Electricity 50%~100% light GREEN .
2. Electricity 20%~50% light YELLOW.
3. Electricity 0%~20% light RED.
When K32s charging and power switch is OFF, electricity LED flash.

4.9 Power switch with volume regulator:

Power switch when battery-powered .(Turn right is ON)
Adjust the internal GM sound volume , turn right for volume up , turn left for
volume down.

4.10 Composite function :Transpose -7~0~+7:

"Shift" + Keyboard's <Transpose -7~0~+7 > : Change to MIDI notes transpose
6