Rankam Member's Mark GR2298901-MM-02 Assembly & Operating Instructions
  1. Manuals
  2. Brands
  3. Rankam Manuals
  4. Griddle
  5. Member's Mark GR2298901-MM-02
  6. Assembly & operating instructions

Rankam Member's Mark GR2298901-MM-02 Assembly & Operating Instructions

Outdoor gas griddle
Hide thumbs Also See for Member's Mark GR2298901-MM-02:
Table of Contents

Advertisement

Quick Links

OUTDOOR GAS GRIDDLE
Model number: GR2298901-MM-02
ASSEMBLY & OPERATING INSTRUCTIONS
This instruction manual contains important information necessary for the
proper assembly and safe use of the appliance.
Read and follow all warnings and instructions before assembling/using the
appliance.
Follow all warnings and instructions when using the appliance.
Failure to follow these instructions and warnings could result in damage to the
product or injury to the user.
Keep this manual for further reference.
For assistance, contact customer service at
1-888-837-1380
or at
For Outdoor Use Only
Should you encounter any problem,
CALL US FIRST.
Do not return product to the store.
WE CAN HELP.
, Mon to Fri, 8:00am – 5:00pm Pacific Standard time
1 of 31
customerservice@rankam.com
20190827-Ver.1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Member's Mark GR2298901-MM-02 and is the answer not in the manual?

Questions and answers

Related Manuals for Rankam Member's Mark GR2298901-MM-02

Summary of Contents for Rankam Member's Mark GR2298901-MM-02

  • Page 1 Should you encounter any problem, CALL US FIRST. Do not return product to the store. WE CAN HELP. For assistance, contact customer service at customerservice@rankam.com 1-888-837-1380 or at , Mon to Fri, 8:00am – 5:00pm Pacific Standard time 1 of 31...

  • Page 2: Safety Labels

    WARNINGS SAFETY LABELS DANGER: Indicates an imminent hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
  • Page 3 WARNING  This outdoor cooking gas appliance shall be used only outdoors and shall not be used in a building, garage or any other enclosed area.  This outdoor cooking gas appliance is not intended to be installed in or on boats. This appliance is not intended to be installed in or on recreational vehicles.

  • Page 4: Before Every Use

    USE AND INSTALLATION OF LP GAS CYLINDER (PROPANE TANK) BEFORE INSTALLING: The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2, or the Standard for Recreational Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, Recreational Vehicle Code, as applicable.
  • Page 5 DANGER  DO NOT connect this grill to an existing #510 POL cylinder valve with Left hand threads. The Type 1 valve can be identified with the large external threads on the valve outlet.  DO NOT connect to a propane cylinder exceeding its capacity. ...

  • Page 6: Installing Gas Cylinder

    INSTALLING GAS CYLINDER 1. Check that the cylinder valve is closed by turning the knob in clockwise. 2. Place cylinder into tank holder in bottom cabinet. 3. Place cylinder such that the valve opening faces the right side table in such a way that the hose is not kinked/damaged.

  • Page 7: Connection Procedures

    CONNECTION PROCEDURES Make sure the tank valve is closed (turn valve clockwise until tight). Check the tank valve to insure it has the proper external male threads. Make sure all burner valves are turned OFF. Inspect valve connections, port, and regulator assembly.

  • Page 8: Product Diagram

    PRODUCT DIAGRAM 8 of 31 20190827-Ver.1.0...

  • Page 9: Component List

    COMPONENT LIST 1. Hook 2. Side Table Handle 3. Griddle 3pcs 2pcs 4. Side Table 5. Side Table Left Bracket 6. Side Table Right Bracket 2pcs 2pcs 2pcs 7. Griddle Adjustor 8. Grease Drip Tube 9. Left Rear Leg 2pcs 10.
  • Page 10 13. Right Cart Beam 14. Right Rear Leg 15. Locking Caster 2pcs 16. Tank Holder 17. Tank Hook 18. Right Front Leg 19. Cart Base 20. Front/Rear Cart Beam 21. Tank Holder Supporting Beam 2pcs 22. Scraper 10 of 31 20190827-Ver.1.0...

  • Page 11: Hardware List

    HARDWARE LIST Item No. Item name Diagram M6x12mm Bolt Symbol: The following symbols will be shown in each procedure for indication of tightening the bolt and nut if necessary. Hand Tighten only at this time Tighten with tools at this time WARNING ...
  • Page 12 Replacement Part List (I) 12 of 31 20190827-Ver.1.0...
  • Page 13 Replacement Part List (II) Part Part Name Part Part Name Number Number Hook Side Table Handle Griddle Side Table Side Table Left Bracket Side Table Right Bracket Griddle Adjustor Grease Drip Tube Left Rear Leg Grill Body Assembly Grill Body - Body Grill Body - Carry Over Grill Body - Burner Grill Body - Valve &...

  • Page 14: Assembly Procedures

    ASSEMBLY PROCEDURES Step 1 Attach the Right Front & Rear Legs (18 & 14) to the Right Cart Beam (13) and the Tank Holder Supporting Beam (21) using 6pcs M6x12 Bolts (A). Remark: Please remind the holes position of the beams (13 & 21) as shown below.
  • Page 15 Step 3. Attach the left and right leg assemblies to the Front / Rear Cart Beam (20) using 8pcs M6x12 Bolts (A). Step 4 Attach the Cart Base (19) to the cart assembly using 12pcs M6x12 Bolts (A). 15 of 31 20190827-Ver.1.0...
  • Page 16 Step 5 Attach the Locking Casters (15) and tighten them to the right legs as shown. Step 6 Make sure that all the legs, beams and cart base are aligned then fully tighten all the bolts on the cart assembly. 16 of 31 20190827-Ver.1.0...
  • Page 17 Step 7 Attach the Tank Holder (16) and the Tank Hook (17) to the cart assembly using 4pcs M6x12 Bolts (A). Fully tighten the bolts. Step 8 This step needs two people to complete! Attach the Grill Body Assembly (10) to the cart assembly using 4pcs M6x12 Bolts (A) and fully tighten the bolts. 17 of 31 20190827-Ver.1.0...
  • Page 18 Step 9 Attach the Side Table Left & Right Brackets (5 & 6) to the Side Table (4) using 4pcs M6x12 Bolts (A) as shown below. Attach the Side Table Handle (2) and the Hooks (1) to the Side Table (4) using 2pcs M6x12 Bolts (A). Tighten all the bolts.
  • Page 19 Step 11 Attach the Side Table Left & Right Brackets (5 & 6) and the Side Table Handle (2) to the Side Table (4) using 6pcs M6x12 Bolts (A). Tighten all the bolts. Step 12 Attach the right side table assembly to the grill body using 4pcs M6x12 Bolts (A) and tighten all the bolts.
  • Page 20 Step 13 Attach the Grease Drip Tube (8) to the grill body using 2pcs M6x12 Bolts (A) and tighten all the bolts. Step 14 Attach the Griddle Adjustor (7) to the Griddle (3) as shown. 20 of 31 20190827-Ver.1.0...
  • Page 21 Step 15: This step needs two people to complete! Place the griddle on the grill as shown. You can adjust the height of griddle by rotating the griddle adjustor. Step 16: Your unit is fully assembled! Make sure to read and follow the Instruction Manual before operating this appliance.

  • Page 22: Before Testing

    LEAK TEST GENERAL Although all gas connections on the grill are leak tested at the factory prior to shipment, a complete gas tightness check must be performed after assembly to ensure fittings were not damaged after leaving the factory. Periodically check the entire system for leaks following the procedures listed below.

  • Page 23: Lighting Instructions

    LIGHTING INSTRUCTIONS BEFORE LIGHTING WARNING  Inspect the gas supply hose prior to turning the gas ON.  If there is evidence of cuts, wear, or abrasion, the hose must be replaced prior to use.  Do not use the grill if the odor of gas is present. ...
  • Page 24 To turn burners off, turn the control knobs clockwise until they lock in the OFF position. USING MATCH TO LIGHT BURNER Turn OFF all burner valves. Place a long lit match through lighting hole in the left hand side of the grill to approximately 1/2”...

  • Page 25: Flame Characteristics

    FLAME CHARACTERISTICS This procedure outlines how to check for proper burner flame characteristics. Burner flames should be blue and stable with little yellow tips, with no excessive noise, or lifting. If the flame is yellow, it indicates insufficient air. If the flame is noisy and tends to lift away from the burner, it indicates too much air.

  • Page 26: Burner Cleaning

    Spiders and small insects occasionally spin webs or make nests in the grill burner tubes during transit and warehousing. These webs can lead to gas flow obstruction that could result in a fire in and around burner tubes. This type of fire is known as flashback and can cause serious damage to your grill and create an unsafe operating condition for the user.

  • Page 27: Main Burner Replacement

    MAIN BURNER REPLACEMENT 1. Remove the griddle. 2. Remove the burner fixing bolt as shown. 3. Remove the carry over. 4. Remove the burner from the grill body. Step 2 Step 4 TO REINSTALL THE MAIN BURNERS: 1. Insert the burner into the burner valve. 2.
  • Page 28 PROPERLY INSTALL THE BURNER Firmly seat the valve orifice into the burner tube. Make sure the valve orifice is inserted STRAIGHTLY into the burner tube. Burner flames will be yellow, with excessive noise, lifting or flash back if the burner is not installed properly.

  • Page 29: Seasoning The Griddle

    SEASONING THE GRIDDLE Seasoning is a process by which oil is baked into metal to create a stick-resistance surface and helps to prevent rusting. It can prolong the life of your griddle. First time use: Wash your griddle with a mild dishwashing detergent to wash out the protective coating applied for shipping.

  • Page 30: Troubleshooting

    TROUBLE SHOOTING Problem: Possible Causes: Corrective Actions: Burner will not 1. LP cylinder fuel is used up. 1. Change a new full LP cylinder. light 2. Electrode tip not in proper 2. Tip of electrode should be pointing position. toward gas port opening on burner. 3.

  • Page 31: Limited Warranty

    For assistance, contact customer service at customerservice@rankam.com or at 1-888-837-1380, Mon to Fri, 8:00am – 5:00pm Pacific Standard time Manufacturer information Rankam (China) Manufacturing Company Limited Address: 18/F,. New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong. 31 of 31 20190827-Ver.1.0...

Table of Contents

Save PDF