Avaya 8800 Engineering Manual

Avaya 8800 Engineering Manual

Ethernet routing switch, virtual services platform, basic spb configuration

Advertisement

Ethernet Routing Switch
8800
Virtual Services Platform
7000 9000
Engineering
> Basic SPB Configuration
Avaya Data Solutions
Document Date: February 2013
Document Number: NN48500-632
Document Version: 2.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8800 and is the answer not in the manual?

Questions and answers

Summary of Contents for Avaya 8800

  • Page 1 Ethernet Routing Switch 8800 Virtual Services Platform 7000 9000 Engineering > Basic SPB Configuration Avaya Data Solutions Document Date: February 2013 Document Number: NN48500-632 Document Version: 2.0...
  • Page 2 Avaya customers and other parties through the Avaya Support Web site: http://www.avaya.com/support Please note that if you acquired the product from an authorized reseller, the warranty is provided to you by said reseller and not by Avaya. Licenses THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE, HTTP://SUPPORT.AVAYA.COM/LICENSEINFO/...
  • Page 3 Version Revised By Remarks 7/12/2011 John Vant Erve Initial Release 4/20/2012 John Vant Erve Added multicast provisioning for IP Shortcuts, L2VSN, and L3VSN 2/11/2013 John Vant Erve Added VSP 7000 and VSP 9000 Avaya Inc. – External Distribution February 2013...
  • Page 4: Table Of Contents

    Enabling Multicast over IP Shortcuts ....................26 Configuration ..........................26 Enable SPB Multicast – Global....................... 26 5.1.1 5.1.2 Enable L3 SPB Multicast ........................26 Show Commands ........................28 L2VSN ..............................29 Configuration ..........................29 6.1.1 Create VLAN ............................29 Avaya Inc. – External Distribution February 2013...
  • Page 5 Enable DiffServ Access ........................43 11.1.4 Enable QoS Port Level ........................43 11.1.5 Police Profile ............................44 CFM SPB & CMAC - Configuration Details ..................46 DiffServ Details – ERS 8800 & VSP 9000 ..................47 Avaya Inc. – External Distribution February 2013...
  • Page 6 Italic text in a Courier New font indicates text the user must enter or select in a menu item, button or command: ERS5520-48T# show running-config Output examples from Avaya devices are displayed in a Lucida Console font: ERS5520-48T# show sys-info Operation Mode:...
  • Page 7: Summary Of Spb Services

    Enterprise Fabric & Switch Cluster Interoperability 10.3 (2H'13) Enterprise Fabric & Stackable Chassis Interoperability 10.3 (2H'13) Enterprise Fabric Connectivity Management (802.1ag) CFM, L2 Ping, Traceroute, and Tracetree L2 Ping for Access VLAN (CVLAN) 3.4 (2H'13) 10.4 (CY14) Avaya Inc. – External Distribution February 2013...
  • Page 8: Spb Configuration

    SPB bridges so that each bridge will make a similar decision for computing routes and load-balancing traffic. SPB – SMLT SMLT Peer System xx:xx:xx:xx:xx:xx Each SMLT cluster switch must be peered with the System ID (B-MAC) of its peer Avaya Inc. – External Distribution February 2013...
  • Page 9 C-VLAN where each domain is further subdivided into logical groupings called Maintenance Associations. For the ERS 8800 starting in release 7.1.1 and the VSP 7000, a SPBM Domain Name of spbm and a C-VLAN Domain Name of cmac will be automatically created.
  • Page 10: Spb Example

    2.1.1 SPB Example Assuming we have two of each VSP 9000, VSP 7000, and ERS 8800 bridges, the following chart provides an example of suggested values. Item ERS 8800 VSP 7000 VSP 9000 System 8001 8002 7001 7002 9001...
  • Page 11: Configuration Nni

    The ERS 8800 which supports either CLI or ACLI. The VSP 7000 and VSP 9000 only support ACLI. On an ERS 8800 switch, to change from CLI to ACLI, enter the CLI command config boot flags acli true and save boot. Prior to making the change, you should convert the configuration ...
  • Page 12: Spb B-Vlans

    It is recommended to start the B-VLAN number using the highest addressable range starting at 4050 or higher up to 4065. 2.2.5 ISIS Configuration isis system-id 0049.0001.0100 isis manual-area add 49.0001 ACLI router isis system-id 0049.0001.0100 manual-area 49.0001 exit Avaya Inc. – External Distribution February 2013...
  • Page 13: Isis Spb Configuration

    The ISIS nick-name must be provisioned on all SPB bridges and must be unique on each SPB bridge. 2.2.7 ISIS SPB SMLT Configuration At this time, the configuration shown below only applies to the ERS 8800 and VSP 9000. isis spbm 1 smlt virtual-bmac 00:49:00:01:05:01 isis spbm 1 smlt peer-system-id 0049.0001.0600 ACLI Avaya Inc.
  • Page 14: Enable Isis

    2/5 isis spbm 1 state enable ethernet 2/5 isis enable ACLI interface GigabitEthernet 3/3 isis isis spbm 1 isis enable exit VSP 7000: interface fastEthernet 3/3 isis isis spbm 1 isis enable exit Avaya Inc. – External Distribution February 2013...
  • Page 15: Show Commands

    2.2.9.2 MLT Level  The following only applies to the ERS 8800 and VSP 9000. For the VSP 7000, you need to enable ISIS on the aggregate Ethernet ports that are part of an MLT. mlt 1 isis create...
  • Page 16: Vsp 7000 - Rear Port Mode

    For example, to change the LACP on the FI Up (right) Top ports: interface fastEthernet 34-36 lacp key 4094 exit show lacp aggr show lacp port aggr <aggr id> show lacp debug member 34-36 Avaya Inc. – External Distribution February 2013...
  • Page 17: Cfm

    3.1.1 3.1.1.1 Pre 7.1.1.0 for the ERS 8800 and release 3.3 for the VSP 9000 CLI - MD =spbm, B-VLANs 4051 & 4052, MA = 4051 & 4052, MEP = 2, Level = 5 (default = 4) cfm md spbm create...
  • Page 18 3.1.1.2 Release 7.1.1.0 or higher for the ERS 8800 and release 10.2 for the VSP 7000 cfm cmac mepid <1-8191> cfm cmac level <0-7> cfm cmac state enable cfm spbm mepid <1-8191> cfm spbm level <0-7> cfm spbm state enable ACLI cfm cmac mepid <1-8191>...
  • Page 19: Show Command

    4052 routernodename 8007 l2traceroute vlan 4051 routernodename 8007 l2traceroute vlan 4052 routernodename 8007 CFM CMAC Test Commands – ERS 8800 only using CFM MAC and C-VLAN ID show cfm cmac info show cfm cmac l2 ping vlan 10 mac 00:e0:7b:bc:23:de l2ping 10.00:e0:7b:bc:23:de...
  • Page 20: Enabling Ip Shortcuts

    Once IP is enabled on each SPB node, the ISIS source IP should be learn via all SPB nodes  where IP is enabled. The ISIS source IP is the address used for IP packets originating from an SPB node. Avaya Inc. – External Distribution February 2013...
  • Page 21: Vlan

    ACLI - – Assuming RSMLT is used, IST MLT ID is 1, and SMLT ID is 5 vlan create 1012 type port-mstprstp 0 vlan mlt 1012 1 vlan mlt 1012 5 interface vlan 1012 ip address 10.7.112.1 255.255.255.0 ip rsmlt ip rsmlt holdup-timer 9999 exit ip rsmlt edge-support Avaya Inc. – External Distribution February 2013...
  • Page 22: Redistribute Ip Networks Via Isis - Direct Interfaces

    4.1.4 4.1.4.1 Non SMLT Cluster ip isis redistribute direct create ip isis redistribute direct enable ip isis redistribute direct apply ACLI router isis redistribute direct redistribute direct enable exit isis apply redistribute direct Avaya Inc. – External Distribution February 2013...
  • Page 23 "suppressIST" redistribute direct enable exit isis apply redistribute direct VSP 9000: ip prefix-list "IST" 10.2.1.0/30 ge 30 le 30 route-map "suppressIST" 1 enable Avaya Inc. – External Distribution February 2013...
  • Page 24 "suppressIST" redistribute direct enable exit isis apply redistribute direct  Other protocols such as static, BGP, RIP, or OSPF can also be redistributed via ISIS Avaya Inc. – External Distribution February 2013...
  • Page 25: Show Command

    SPB ISIS LSP (link state protocol) of local node to verify direct route are sent out show isis lsdb lspid 0049.0001.0100.00-00 show isis lsdb lspid 0049.0001.0100.00-00 tlv detail tlv 135 135 detail Avaya Inc. – External Distribution February 2013...
  • Page 26: Enabling Multicast Over Ip Shortcuts

    5. Enabling Multicast over IP Shortcuts This section only applies to the ERS 8800 at this time. 5.1 Configuration config ACLI config terminal Enable SPB Multicast – Global 5.1.1 isis spbm 1 multicast enable ACLI router isis spbm 1 multicast enable exit 5.1.2...
  • Page 27 3 exit  On an ERS 8800, IGMPv3 only works if the receiver uses SSM (S.G IGMPv3 join). It is unable to process a *.G IGMPv3 join. Avaya Inc. – External Distribution February 2013...
  • Page 28: Show Commands

    ISID with a value of 1600000x. TLV 144 on the BEB bridge where the sender is located should have the Tx bit set while on all BEB bridges where there is a receiver should have the Rx bit set. Avaya Inc. – External Distribution February 2013...
  • Page 29: L2Vsn

    GigabitEthernet 2/4 encapsulation dot1q exit vlan create 100 type port-mstprstp 0 vlan members 100 2/4 vlan members remove 1 2/4 6.1.2 Add I-SID to VLAN vlan 100 i-sid 100100 ACLI vlan i-sid 100 100100 Avaya Inc. – External Distribution February 2013...
  • Page 30: Show Commands

    4052 i-sid show isis spbm multicast-fib vlan 4052 i-sid 100100 100100 SPB i-sid details show isis lsdb lspid 0049.0001.0200.00-00 show isis lsdb lspid 0049.0001.0200.00-00 tlv 144 sub-tlv 3 detail tlv 144 sub-tlv 3 detail Avaya Inc. – External Distribution February 2013...
  • Page 31: Multicast Over L2Vsn

    IGMP query address. If you omit adding a query address, the SPB bridge will send IGMP queries with a source address of 0.0.0.0. Depending on the edge switch model, it may not accept a query with a source address of 0.0.0.0. This is the case if using an Avaya stackable Avaya Inc. – External Distribution...
  • Page 32 192.168.99.1 ip igmp ssm-snoop ip igmp version 3  On an ERS 8800, IGMPv3 only works if the receiver uses SSM (S.G IGMPv3 join). It is unable to process a *.G IGMPv3 join. Avaya Inc. – External Distribution February 2013...
  • Page 33: Show Commands

    ISID with a value of 1600000x. TLV 144 on the BEB bridge where the sender is located should have the Tx bit set while on all BEB bridges where there is a receiver should have the Rx bit set. Avaya Inc. – External Distribution February 2013...
  • Page 34: L3Vsn

    1000 vrf blue vlan 1000 ip create 10.5.100.1/24 vlan 1 ports remove 2/4 ACLI interface GigabitEthernet 2/4 encapsulation dot1q exit vlan create 1000 type port-mstprstp 0 vlan members 1000 2/4 vlan members remove 1 2/4 Avaya Inc. – External Distribution February 2013...
  • Page 35: L3 Ipvpn

    ACLI router vrf blue isis redistribute direct isis redistribute direct enable exit isis apply redistribute direct vrf blue Avaya Inc. – External Distribution February 2013...
  • Page 36: Show Commands

    SPB i-sid & IP fib, local and remote show isis lsdb lspid 0049.0001.0100.00-00 show isis lsdb lspid 0049.0001.0100.00-00 tlv 184 detail tlv 184 detail show isis lsdb lspid 0049.0001.0700.00-00 show isis lsdb lspid 0049.0001.0700.00-00 tlv 184 detail tlv 184 detail Avaya Inc. – External Distribution February 2013...
  • Page 37: Multicast Over L3Vsn

    9. Multicast over L3VSN This section applies to the ERS 8800 only at this time. If you only wish to perform multicast, it is not necessary to enable the L3VSN or redistribute  unicast routes into or out of ISIS. Multicast routing does not depend on unicast routing (both for VRF and GRT).
  • Page 38: Enable L3 Spb Multicast

    2255 ip igmp version 3 exit  On an ERS 8800, IGMPv3 only works if the receiver uses SSM (S.G IGMPv3 join). It is unable to process a *.G IGMPv3 join. Avaya Inc. – External Distribution February 2013...
  • Page 39: Show Commands

    ISID with a value of 1600000x. TLV 144 on the BEB bridge where the sender is located should have the Tx bit set while on all BEB bridges where there is a receiver should have the Rx bit set. Avaya Inc. – External Distribution February 2013...
  • Page 40: Inter Vsn Routing

    150 i-sid 100150 ACLI vlan create 100 type port-mstprstp 0 vlan members 100 2/4 vlan i-sid 100 100100 vlan create 150 type port-mstprstp 0 vlan members 150 2/8 vlan i-sid 150 100150 Avaya Inc. – External Distribution February 2013...
  • Page 41: Vrf

    100 ip create 10.5.100.1/24 vlan 150 ip create 10.5.150.1/24 ACLI ip vrf inter-isid interface vlan 100 vrf inter-isid ip address 10.5.100.1 255.255.255.0 exit interface vlan 150 vrf inter-isid ip address 10.5.150.1 255.255.255.0 exit Avaya Inc. – External Distribution February 2013...
  • Page 42: Qos

    <ports> name trust Please note that only the ERS 8800 required DiffServ to be enabled as the default value is  disabled on all ports. In regards to the VSP 7000 and VSP 9000, DiffServ is enabled by default on all ISIS enabled ports.
  • Page 43: Enable P-Bit Override

    <slot/port> qos 802.1p-override enable exit 11.1.3 Enable DiffServ Access This section applies to the VSP 9000 and ERS 8800. By default, all non NNI ports on the VSP 7000 are untrusted. ethernet <slot/port> access-diffserv <enable|disable> ACLI interface gigabitEthernet <slot/port>...
  • Page 44: Police Profile

    1 type inPort name Police5M filter acl port 1 3/24 filter acl ace 1 1001 name Police5M filter acl ace action 1 1001 permit filter acl ace action 1 1001 permit police 1 Avaya Inc. – External Distribution February 2013...
  • Page 45 Police5M vlan-min 1000 vlan-max 1000 eval-order 5 committed-rate 5056 max-burst-rate 7040 drop-out-action enable qos traffic-profile set port 20 name Police5M show qos traffic-profile classifier name Police5M show qos traffic-profile set port 20 name Police5M Avaya Inc. – External Distribution February 2013...
  • Page 46: Cfm Spb & Cmac - Configuration Details

    If a node is acting as a BCB (i.e. it has no CVLANs) no point enabling CFM CMAC on it  Use a higher level (6) on CMAC CFM  Leave default level (4) on SPBM CFM Avaya Inc. – External Distribution February 2013...
  • Page 47: Diffserv Details - Ers 8800 & Vsp 9000

    13. DiffServ Details – ERS 8800 & VSP 9000 Case enable- Access- 802.1p- Result DSCP p-bit diffserv diffserv override Modified modified Bridged false false disable L2 trusted L3 trusted Bridged false true disable L2 trusted L3 untrusted Bridged true...
  • Page 48 © 2013 Avaya Inc. All Rights Reserved. Avaya and the Avaya Logo are trademarks of Avaya Inc. and are registered in the United States and other countries. All trademarks identified by ®, TM or SM are registered marks, trademarks, and service marks, respectively, of Avaya Inc. All other trademarks are the property of their respective owners.

This manual is also suitable for:

90007000

Table of Contents