How to use the purge function
How to use the purge function
Introduction
Symbol
CAUTION
Do not open the bridge and do not remove the prints manually.
Always use the purge function first.
When to do
On the screen of the folder, there is an error message, for example "#3:82:01".
Procedure
1. Tap and hold the purge button.
2. If the cleaning phase is passed, you can stop to hold the button.
3. Finally check the folder. It should be empty of any packages.
42
Chapter 6 - Trouble shooting
Type of symbol
Indicates
CAUTION
In order to guarantee hazard-free operations it is strongly rec-
ommended that any maintenance or repair work is only car-
ried out by trained personnel. Ignoring this warning could
cause injury or damage to property.