Franklin 2719 Assembly Instructions

Step 6:
Before putting the net on the frame, secure part (2), "Infinite Adjustment" system by
screwing onto pole counter clockwise. To attach net part (11) to frame, spread out net
and find red tabs attached to net. The red tabs indicate the corners of the net. To attach
net, start with one corner and attach with one bungee, then attach the other three
corners. Next, start at the top of the frame and attach the bungees across the top
spreading them evenly. Attach the bungees on one side spreading them evenly. Repeat
on bottom and then on final side.
Use extreme caution when assembling
the net to the frame. The bungees will
be under extreme tension and must be
attached carefully. Adult assembly is
strongly recommended.
Note: To fold flat for easy storage, depress push
pins on part (6) and release support arm. Unit
will now fold flat.
Step 7:
To attach bungees to net
hold plastic ball in place
and wrap free end around
net and side tube. Loop
free bungee around plastic
ball.
Step 9: Step 10:
Attach catcher target, part Attach collection bag, part
(13), to bunees on other side (14), to clips on front of
of return. Place bungee catcher target.
hooks into metal holes
around the outside of target
screen.
For Replacement Parts Call 1-800-225-8649
MA Residents Call 1-781-341-5178
FRANKLIN SPORTS INC. Stoughton, MA 02072
Step 8:
Attach target ribbon part
(12) by weaving through
net and tying off at
ends.
Step 11:
To draw back target,
attach back straps to the
back brace pole.
www.franklinsports.com
ISO 4/08
DELUXE 2 in 1
Throwing & Pitching
Combo Set
Item #2719
Note: Do not extend
"Infinite Angle" adjustment
system beyond red
indicator mark on tube.
Return Trainer
Pitch Target
TOOLS REQUIRED:
FLAT OR PHILLIPS SCREWDRIVER