Pg4Uw The Programmer Software - Elnec BeeHive304 User Manual

PG4UW the programmer software

Program PG4UW is common control program for all Elnec programmers. We guarantee
running of these programs under all of above mentioned operating systems without any
issues. Background operation under Windows is error-free.
Using the programmer software
Run the control program
In Windows environment: double click on icon PG4UW.
After start, control program PG4UW automatically scan all existing ports and search for
connected Elnec programmer. Program PG4UW is common for all Elnec programmers,
therefore it tries to find all supported programmers.
Notes: When PG4UW is launched, program performs self-check for its integrity. If successful,
program displays a standard user menu and waits for your instructions.
If the control program cannot communicate with the programmer, an error message appears
on the screen, including error code and description of possible reasons (disconnected
programmer, bad connection, power supply failure, incompatible port...). Eliminate the error
source and press any key. If error condition still exists, the program resumes its operation in
the demo mode and access to the programmer is not possible. If you cannot find the cause of
the error, follow the instructions in Troubleshooting section. In addition, the control program
checks communication with programmer prior to any operation with the programmed device.
Buffer synchronization for programmer with internal data disk
Buffer synchronization operation is automatically performed for advanced programmers with
internal data disk in following situations:
before the first device operation
after device read operation
after selecting new device
after loading project
after (re)finding of programmer in PG4UW control program
Buffer synchronization copies required data for device from PC (host computer running
PG4UW) buffer to internal programmer disk (or from programmer disk to PC after device
reading). This
Program/Verify, because no data are transferred during device operations, whole
The control program delivered by Elnec, included on the
CD in your package, is granted to be free from any viruses
at the moment of delivery. To increase their safety our
programs include a special algorithm for detecting possible
virus infections.
feature significantly increases performance
59
PG4UW software
of device operations