Replacing The Lamp Cartridge [All Advantage Models] - VIDAR DiagnosticPro Advantage Installation And Operation Manual

Replacing the lamp cartridge [all Advantage models]

Follow the instructions in "Cleaning the diffuser," earlier in this chapter,
but work with the new lamp cartridge in steps 4, 5 and 6.
VIDAR recommends replacing the lamp cartridge once per year as part
of the scheduled preventive maintenance on the film digitizer.
Preventive maintenance is not covered under warranty. (Only failures
during the published warranty period are covered by warranty
replacement. Failures must be confirmed by running VIDAR's ScanInfo
5.2 diagnostic software. The software generates a report showing light
values indicative of lamp performance. You can request a copy of the
ScanInfo program from VIDAR Technical Support.)
Contact VIDAR Technical Support if you have any questions
about installing or using your VIDAR film digitizer:
Phone: +1.800.471.SCAN (+1.800.471.7226)
+1.703.471.7070 outside the U.S.
E-mail: medtech@vidar.com
VIDAR Advantage Series Installation and Operation Guide
106