REP FT-3000 Assembly Instructions

(720) 420-1731
FT-3000 assembly instructions

parts Included:

-2 Main Frame Sides
-2 Horizontal Back Crossmembers
-1 Multi-Grip Pull-up Bar
-Muscle Diagram Plate
-2 Sets of Weight Supports
(spacers and bumpers) and Rods
-2 High Low Uprights
-2 Pulley Carriages
-2 Weight Stacks
-2 Cables
-2 Handle Attachments
-2 Curtain Sets
-2 Top Shroud Sets
-Ball, Rubber Spacer & Metal Stopper x2
Attach horizontal crossmembers and multi-grip
1.
pull-up bar to the back of the frame.
3.
Set up weight supports and insert guide rods to
Any issues? Please contact us directly by phone: 720-420-1731, email: info@repfitness.com or
morse code...(.-. . .--. ..-. .. - -. . ... ...). We are always here for our Customers! - Team REP

Hardware Included:

Screw Cap
x 20
M8x10
Nut
Buttonhead
x 4
Screw x 4
x4
(M12x35)
x4
x20
(M12x35)
x20
x20
x20
prepare for weight stacks.
.5 in
.4 in
Flanged
Washer
Washer
Washer
x 8
x 4
x 20
M8x20
Buttonhead Screw
+ Washer - x 28
2. Slide pulley carriages onto the high-lows. Next secure
high-lows to the frame. The screw that secures the bottom
of the high-low comes pre-assembled.
(This hardware comes preassembled.)
Denver, CO
Lock
M12x35
Washer
Hex Screw x 20
x 20
M8x30
M8x30 Cuphead
Buttonhead
Screw x 2
Screw x 4
x4
(M8x30)
x4
x2
x4
x2