Standby Button - Nordson Encore HD Customer Product Manual

Screen Code

Standby Button

E 2018 Nordson Corporation
When power is activated at the pump cabinet, the controller is turned on.
Upon startup, the function/help display screen will quickly scroll through
various function settings, displaying the following information:
Table 4-2 Startup Display
Encore
XT
HDLV
or
Venturi
or
COD
Loc
or
Ext
Gun − 1, − 2, ...
GC − X.XX
Gd − X.XX
FL − X.XX
Select the desired preset and start production. Refer to Presets on page
4-5 for preset programming instructions.
The controller interface displays actual output when the gun is spraying, and
the current preset setpoints when the gun is off.
Use the Standby button shown in Figure 4-1 to shut off the interface and
disable the spray gun during breaks in production. When the controller
interface is off, the spray gun cannot be triggered and the spray gun
interface is disabled.
To shut off controller power, use the power switch on the pump control unit.
Description
Controller Type
Controller Type
System Type
Local or External Control
Gun Number, 1 − 4
Gun Controller, Software Version
Gun Display Module, Software Version
Flow Module, Software Version
Operation
4-3
Part 1604870-05