TITLE
CN70 Service Work Instructions
SWA bottom housing
Removal
1. Remove the stylus from its storage slot in the back cover.
2. Remove the two plugs that cover a screw at each side of the battery compartment.
3. Remove 8 screws (10 for a CN70E) with a T10 Torx driver. Discard the screws. The screws have a one time use
seal and new screws must be used when reinstalling the bottom housing.
Continued on next page...
CN70A,CN70E
SWA straight imager window
CN70A – 8 screws
CN70E – 10 screws
Model
DOCUMENT NO.
SWICN70-000
Standard angled window
PAGE
Page 9 of 45