Pairing Via Bluetooth; Network Setting - Vava VA-LT002 User Manual

7. PAIRING VIA BLUETOOTH

Select the Bluetooth icon at the top right corner to enter the Bluetooth interface.
1) Use as Bluetooth speaker
Turn on the Open Detection, select Input for Audio Mode on the interface, find and
tab the projector model under Bluetooth Devices on your phone or laptop to play
audios on your device via the built-in speaker of the projector. (Go to Settings ->
General -> Device Name to check the Bluetooth name of the projector)
2) Pairing with audio devices
Select Output for Audio Mode on the interface, select Search Devices, find and
select your audio device under Searched Devices, and the pairing will start
automatically. The paired Bluetooth device will appear under Paired Devices.
3) Pairing with other devices
To pair with Bluetooth controller, keyboard, mouse, remote, etc., just select Search
Devices, and then the device under Searched Devices to pair.
To disconnect with a device, select it in the Paired Devices list and choose
neglecting it.

8. NETWORK SETTING

Select the Network icon at the top right corner to enter the network setting interface.
For wired connection, just plug in the Ethernet cable. For the wireless, find the network
name on the drop-down list, select, and type in the password to connect. It supports
network anomaly detection.
1) The Show Password option cannot be selected when the keyboard is
shown. You need to press the Return button to exit the keyboard to tick
the box.
2) After entering the password, select the Done key to connect.
15/16