Troubleshooting - SCOPREGA BRAVO 110 Instruction Manual

Hand pump

Hide thumbs Also See for BRAVO 110:

Table of Contents

Available languages

TO DEFLATE (BRAVO 110 ONLY)

• Connect the hose to the front of the handle and make sure that "Mode" Lever at the back

of the pump is in vertical position.

• Connect the hose to the inflatable.

• Start pumping till the inflatable is empty.

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Wrong Port connected

Connect the air hose to the proper front Port

Pump will not inflate

Wrong setting on the Mode Lever

Adjust settings

Dust inside the handle filter

Disassemble the handle (unscrew the four screws)

and clean/ change the filter.

Gaskets or internal valves

Contact your local dealer or authorized service center.

damaged

ACCESSORIES

Recommended accessories for use with your pump are available from your local dealer or

authorized service center.

WARNING: The use of any accessory not recommended for use with this pump could be

hazardous.

Table of Contents