Page 1
Re-imaging the Dell OptiPlex™ 7440 All-in-One Computer Instructions 8/2016 Use these instructions to re-image the Dell OptiPlex™ 7440 computer. This document includes the following topics: Re-imaging the Dell OptiPlex 7440 computer (page 2) ...
Page 2
Re-imaging Dell OptiPlex 7440 computer Re-imaging the Dell OptiPlex 7440 computer This topic describes how to re-image the Dell OptiPlex 7440 Introduction computer. Re-imaging will remove all software on the computer and re-install the factory default Microsoft® Windows® operating system. In the event that your computer fails or becomes corrupted, use these instructions to re-image it.
Page 3
Re-imaging Dell OptiPlex 7440 computer The system begins executing a script to re-image the computer. The factory default image will be applied over the old corrupt image. 3. When the operation successfully completes, press any key to continue. The computer restarts and is set back to the factory default...