2011/65/EU and conforms with the standards or standardized documents EN 61010-1, EN 61010-2-051, EN 61326-1, EN ISO 12100 and EN 60529. A copy of the complete EU Declaration of conformity can be requested at sales@ika.com. Explication of warning symbols...
- body parts, hair, clothing and jewellery getting caught. • Process pathogenic materials only in closed vessels under a suitable fume hood. Please contact IKA if you have any • Set up the stand in a spacious area on an even, stable, questions.
Unpacking Unpacking: Delivery scope: - Please unpack the device carefully. - IKA ULTRA-TURRAX T 18 digital ® - In the case of any damage a fact report must be sent im- - Extension arm mediately (post, rail or forwarder). - Hexagon socket screw...
Drive The drive unit opens up a wide range of possibilities for dis- The speed is set by using the differently adjusting wheel. persion technology in the conventional laboratory with a The motor speed can be read off the LED display. For exam- respective performance output of approximately 300 watts ple, a value of 13.6 corresponds to 13600 rpm.
- Wear protective gloves when cleaning the devices. Storage packaging is not sufficient. Please also use suitable - Please consult with IKA before using any cleaning or decon- transport packaging. tamination methods, other than those recommended here. Accessories •...
- Send the device for repair, including a short description of the fault. Warranty In accordance with IKA warranty conditions, the warranty The warranty does not cover worn out parts, nor does it period is 24 months. For claims under the warranty please apply to faults resulting from improper use, insufficient care contact your local dealer.
Need help?
Do you have a question about the ULTRA-TURRAX T 18 digital and is the answer not in the manual?
Questions and answers