Sanyo FXC-503LD Operating Instructions Manual page 3

CAUTION
. Do
not
attempt to remove the panel
in a manner other than that described above.
When installing the panel, do not force it into the unit.
o Do not touch the connection terminals of the panel or the unit. It may
cause poor contact
Lfse a clean, dry cloth when cleaning the terminals.
Keep the panel out of direct sunlight and high temperatures.
Prevent the panel from coming into contact with benzine, thinner, or insecticides.
Do not drop the panel.
GENERAL OPERATION
1 256 7
834
..
TURNING ON
THE UNIT
Install the front panel and press button @
FUNCTION OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Press button @to stop operation.
ELECTRONIC CONTROLS . . . . . . . . . . . . . . . . . .
2,3
Press button @to select the audio functions as shown in the table below.
To adjust the volume, press button@ (either the 0 ore side) while in the volume mode.
To adjust the sound quality, balance or fader, press button@ to select the operation mode, then press the@ 01
e side of button @.
Note
While the mode is not displayed, press button@ and the volume will be aojusted.
I
MODE e (Min) @ (Max)
Down
o up
32
r
VOL
+
BAS
+
TRE
i
BAL
1
Down -5
up
+5
Down -5
up +5
Left L15 Right R15
L---l
FAD
Front F15 Rear R15
-2-
i