Remington Keratin Protect S8598 Quick Manual page 5

2. Press and hold the on button to switch on.
3. The Heat Protection sensor will automatically be on when the styler is first turned on
and this is shown by the
Protection Sensor On/Off button.
4. Start styling on lower temperatures first. Select the appropriate temperature for your
hair type using the "+" and "-" temperature controls on the side of the product.
5. The "+" button will increase the temperature and the "-" button will decrease the
temperature.
Recommended Temperatures
Temperature
160°C - 180°C
180°C - 200°C
200°C - 230°C
7. The temperature display will flash until the selected temperature is reached.
8. Working on one section at a time run the straightener through the entire length of
the hair, without stopping.
9. If the Intelligent Heat Protection Sensor is on during styling, the
tell you that the sensor is monitoring moisture in the hair and is continually
optimising the temperature of the plates to prevent damage. These temperature
changes are not displayed on the straightener but happen quickly and automatically
during styling.
Temperature lock function
Set the desired temperature using the + and - buttons then lock the settings by
•
pressing the "-" button for 2 seconds. The B symbol will appear on the temperature
display.
• To unlock the temperature setting, press and hold the "-" button for 2 seconds.
Temperature boost function
• For quick touch ups of stubborn, hard to style sections.
• The temperature boost function boosts the temperature to 230°C.
• Hold the "+" button for 2 seconds to operate.
• Caution: the highest temperature is not suitable for every hair type. If you plan to
use this straightener on the boost setting of 230°C please test on a small section of
your hair first.
icon. To turn this function off press and hold the Heat
Hair type
Thin / fine, damaged or bleached hair
Normal, healthy hair
Thick and difficult to style hair
icon will pulse to
5