Maytronics Dolphin WAVE 300 XL User Manual
Hide thumbs
Also See for Dolphin WAVE 300 XL:
- User instructions (20 pages) ,
- User instructions (18 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Maytronics Dolphin WAVE 300 XL
Summary of Contents for Maytronics Dolphin WAVE 300 XL
- Page 1 Dolphin WAVE 300 XL Pool Cleaner User Manual 8151452 Rev. 02...
-
Page 2: Table Of Contents
Dolphin WAVE 300 XL Pool Cleaner User Manual Table of Contents IMPORTANT SAFETY INSTRUCTIONS ..............2 FCC STATEMENT ......................3 1. INTRODUCTION ....................4 1.1 Specifications ....................4 1.2 Water conditions ..................4 2. UNPACKING YOUR POOL CLEANER .............4 3. ASSEMBLING THE POOL CLEANER ..............5 4. -
Page 3: Important Safety Instructions
Position the Caddy and power supply at least 3.5 m / 12 ft from pool’s edge – during operation. CAUTION For continued protection against possible electric shock, the power supply unit should be placed at least 11cm / 4’’ above ground. CAUTION Dolphin WAVE 300 XL Pool Cleaner User Manual... -
Page 4: Fcc Statement
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Maytronics Ltd.) could void the user’s authority to operate the equipment. Dolphin WAVE 300 XL Pool Cleaner... -
Page 5: Introduction
Power supply unit assembled to the Caddy base • Filter Bags: 2 fine porosity filter bags assembled in the Dolphin WAVE 300 XL robot for day-to-day cleaning 2 ultra-fine filter bags for fine dust particles 2 loose weave filter bags for rough debris... -
Page 6: Assembling The Pool Cleaner
Two screws communication cable Four screws Main power supply cable Power supply Figure 1: Assembling the Dolphin WAVE 300 XL - 1 Caddy handle Cable roller Floating cable Connection cable between power supply and cable roller Top cover... -
Page 7: Working With The Mmi Console
Some options in the MMI (pool profile setup) menus are blocked with a code to prevent changing the setting accidentally. The code sequence for unblocking these options is: 3, 2, and 1 (Figure 4). Dolphin WAVE 300 XL Pool Cleaner User Manual... -
Page 8: Mmi Alerts
If the error repeats itself, then details of the specific error are displayed on the MMI screen (Figure 4). If this occurs, contact your Maytronics dealer immediately. 4.3 MMI Functions The following functions are available on the MMI console. - Page 9 Press the down arrow or up arrow , to highlight Language, and press Select to enter the Language interface mode. Note: To return to English from any other language, press and hold the Menu button on the Wave 300 XL screen for 3-4 seconds. Dolphin WAVE 300 XL Pool Cleaner User Manual...
-
Page 10: Choosing Additional Pool Profiles
Select Pool Pool A Pool B Pool C Pool D Select Exit 3. Choose a different pool profile (Pool B, Pool C, or Pool D) and press Select. The selected pool profile appears. Dolphin WAVE 300 XL Pool Cleaner User Manual... -
Page 11: Settings
(A, B, C, or D) to be cleaned. Note: Additional pool profiles can only be configured by an official Maytronics WAVE technician. In the event that permission for configuration is granted, select the pool you want to program (A, B, C, D). -
Page 12: Daily Operation
A warning message to perform Preventive Maintenance appears on the MMI screen, when applicable. Preventive Maintenance service must be performed in a timely manner. Contact your dealer to arrange this service. Failure to perform the Preventive Maintenance service will void the warranty. Dolphin WAVE 300 XL Pool Cleaner User Manual... -
Page 13: Using The Remote Control Unit
If you press the Turn Left or Turn Right buttons while the robot is driving forward or backward, the robot turns left or right by turning one belt and stopping the opposite belt. Dolphin WAVE 300 XL Pool Cleaner User Manual... -
Page 14: Cleaning The Filter
Open the zippers on each filter bag and empty the contents. Rinse the 2 bags. Insert the 2 filter bags into the robot and close the top cover. The robot is ready for a new cleaning cycle. Dolphin WAVE 300 XL Pool Cleaner User Manual... -
Page 15: Troubleshooting
Is there an obstruction in If the problem persists, contact your the water channel or in Maytronics dealer. the robot’s driving belts? Navigation Does the problem reoccur Contact your Maytronics dealer. System every operation? Dolphin WAVE 300 XL Pool Cleaner User Manual... - Page 16 HOME on the MMI? roller inner connection and connect the cable directly to the power supply. DC input Is there an electrical short, Contact your Maytronics dealer. or a partial or complete disconnection? Dolphin WAVE 300 XL Pool Cleaner User Manual...
- Page 17 Dolphin WAVE 300 XL Pool Cleaner User Manual www.maytronics.com 8151452 Rev. 02...
Need help?
Do you have a question about the Dolphin WAVE 300 XL and is the answer not in the manual?
Questions and answers