Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Data-Tronix DT-HDIPCOM
Summary of Contents for Data-Tronix DT-HDIPCOM
- Page 1 INSTALLATION & CONFIGURATION MANUAL DT-HDIPCOM HD IP Streaming Server...
-
Page 2: Table Of Contents
Device Network..............................22 DLNA Settings ................................ 23 Administration ................................. 24 Streaming Methods Case ............................26 COM2000 LCI (Local Channel Insertion) ........................26 HDIP Streaming Server Notes ........................... 29 NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 2... -
Page 3: Safety Precautions
Inspect the package before starting installation to ensure there is no damage and all supplied contents are present. Contact your distributor or dealer should the device be damaged or package contents are incomplete. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 3... -
Page 4: Product Description
Product Description Data-Tronix's DT-HDIPCOM HD IP Streamer allows the user to stream any one audio/video source over an IP Network to up to anyTV's or connected computers within the IP Network. The IP Streamer accepts a HDMI, component, or composite video input and the unit is designed to deliver a rich HD/SD streaming experience for its users deploying MPEG-2 or MPEG-4 standards. -
Page 5: Specifications
9.29” x 6.10” x 1.37” (236mm x 155mm x 35mm) Weight 2 lbs. and 1.1575 oz. (940g) Manufactured under license of Dolby Laboratories *Specifications subject to change without prior notice NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 5... -
Page 6: Installation
1. All UPnP/DLNA devices, including the HDIP streaming server (media-server), media-players, the SmartTV, the Limitations: 2. If a DHCP server is present in the private network, the DT-HDIPCOM will use the IP address assigned by the set-top-box, and the controlling PC, should be located within same network segment/LAN. -
Page 7: Front-Panel
Indicates device is encoding video using H.264 Indicates device is encoding audio using MPEG-1 Layer 2 Indicates device is encoding audio using AAC Dolby Digital Indicates device is encoding audio using Dolby Digital recording NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 7... -
Page 8: Procedure To Connect To The Streaming Server Via The Network Port
2. Using a PC go to the Control Panel to “Network and Internet” Start- Control Panel ==> View Network Status and Tasks 3. Select 'Change Adapter Settings' from the left plane NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 8... - Page 9 4. Select Local Area Connection Icon Then Right Click – Select Properties Internet Protocol Version 4(TCP/IPv4) Properties NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 9...
- Page 10 5. Change “Obtain an IP address automatically” to “Use the following IP address” Set your LAN IP address to 192.168.1.2, with a subnet mask of 255.255.255.0. Once your LAN IP address has been set, access the DT-HDIPCOM unit using your web browser and entering “192.168.1.9” into your address bar.
- Page 11 Required” screen will be presented. Enter the User Name and Password then click Login. User Name: admin Default Password: Admin123 Note: User Password can be changed – See Administration Page NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 11...
- Page 12 Press/Click the LED ON button (shown below). This will cause the CFG LED light to flash continuously for the installer to identify and locate the HDIP in the Headend. To turn off, simply press the LED tool again. Click Here to Enable/Disable NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 12...
-
Page 13: Overview Page
Overview Page Overview / Welcome page displays current status of the encoder including Input type, Output format type, Output Bitrate, Actual Output, Encoder Status, and # of connected Clients. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 13... -
Page 14: Encoder Setup
Encoder Setup The DT-HDIPCOM provides the user with a variety of parameter settings. Many of the default settings will allow the user to quickly start streaming video. Only some of the settings shown will require any change. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0... -
Page 15: Video Control
Selecting HDMI, Component, or Composite “locks” the encoder to detect only the input type selected. Note: We recommend using the Factory default 'Auto Detect' Set Video Output Format The DT-HDIPCOM can output High Quality HD/SD video streams in either MPEG-2, MPEG-2 CBR (Constant Bit Rate), H.264, H.264 CBR. Select the desired Video Output Format Factory Default: H.264 CBR... - Page 16 H.264 Video Bitrates HD: 2~10 Mbps (default- 10 Mbps) SD: 1~4 Mbps (default- 4 Mbps) The DT-HDIPCOM allows the user to Set the Video Bitrate desired within the defined parameters offered. Set or use the default settings as required. Select Aspect ratio...
-
Page 17: Audio Control
Application Note: If your Video Source is HDMI and you require an alternate Audio Source – Select Analog. This will force the DT-HDIPCOM to use the L/R RCA Audio Inputs as the Audio Source. Select Audio Output Type Use the drop-down tool to Select the Audio Format required. -
Page 18: Color Control
After pressing the 'Save and Confirm' button- the user will be brought back to the Overview page. If you leave the encoder page without saving your changes the encoder will use the previous settings saved. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 18... -
Page 19: Streaming Setup
Streaming Setup The DT-HDIPCOM can be setup to stream via HTTP (DLNA) directly from the network to the DLNA application on a DLNA compliant Smartv, using Multicast (UDP/RTP) direct to a PC or by using a compatible set top box, or by Unicasting (UDP/RTP). -
Page 20: Broadcasting
Select the desired DSCP from the drop-down list. Default is Class 0: Best effort. Press Add after setting, the IP will be shown in the Streaming List. ***SAVE AND CONFIRM all changes made on the Streaming Setup page NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 20... - Page 21 To remove a Destination IP – simply select the IP address and Click 'Remove'. Note: Add up to 16 Destinations to the Streaming List. ***SAVE AND CONFIRM all changes made on the Streaming Setup page NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 21...
-
Page 22: Network Configuration
To set NTP Server- Uncheck 'Enable DHCP' Time Zone Select required Time Zone as required. Speed & Duplex If required- Select using the drop-down tool the required Speed/Duplex parameter. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 22... -
Page 23: Dlna Settings
User MUST enter PORT ID as part of the IP address to Open GUI of device. Default SOAP Port: 8888 *** SAVE AND CONFIRM ALL CHANGES MADE ON THE NETWORK SETUP PAGE NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 23... -
Page 24: Administration
Administration NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 24... - Page 25 A “config.cfg” file will be created. Locate the file My Computer> C Directory > Documents and Settings> User>My Documents>Downloads>configs.cfg. Change Password Remember to Click 'Save and Confirm' button to save new password. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 25...
-
Page 26: Streaming Methods Case
The Technicolor COM2000 system has the ability to accept and insert Local Content into the COM2000 system using the DT-HDIPCOM Streamer and the Technicolor QAM. The Local Content is inserted into the HD IP Streamer which can output either a Unicast or Multicast formatted stream that is then inserted into the COM2000 System. The Technicolor QAM is used to assign a QAM channel to the IP stream and incorporates the local channel into the system. - Page 27 Video Output: Select MPEG-2 CBR Audio Output: Select AC-3 Step 2: Save and Confirm Encoder Changes Step 3: Determine Unicast Destination Port Step 4: Select Streaming Setup Tab NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 27...
- Page 28 Note: We highly recommended backing up your config files for the streamer. See Administration Tab for Backup and Restore Functions. For more detailed step by step instructions see: http://www.technicolor.com/en/solutions-services/connected-home/commercial-video-solutions/library See: Inserting HD/SD Local Content with the COM2000 System NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 28...
-
Page 29: Hdip Streaming Server Notes
HDIP Streaming Server Notes PRODUCT NOTES: ITEM VALUE USER NAME / PASSWORD SERIAL NUMBER INSTALLATION DATE PURCHASE DATE DEVICE NAME FIRMWARE VERSION STREAMING METHOD Distributed by: NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0 Page 29...
Need help?
Do you have a question about the DT-HDIPCOM and is the answer not in the manual?
Questions and answers