Related Manuals for Deda Elementi ALANERA 2020
Summary of Contents for Deda Elementi ALANERA 2020
- Page 1 MANUALE D’USO E MANUTENZIONE USER’S MANUAL Ver. 01 - Dicembre/December 2019 ©Deda Elementi ALANERA MANUBRIO INTEGRATO ALANERA INTEGRATED HANDLEBAR MOD. 2020 / MY 2020...
- Page 2 Per una appropriata installazione del prodotto sono richiesti specifici attrezzi e una adeguata esperienza, si raccomanda dunque che il prodotto sia installato dai punti vendita ufficiali Deda Elementi o da personale qualificato nel montaggio di biciclette. Congratulations for your new Deda Elementi handlebar. Please read these instructions carefully and follow them for correct use.
-
Page 3: Table Of Contents
INDICE INFORMAZIONI GENERALI DI SICUREZZA _____________________________________ pag. 4 GARANZIA ________________________________________________________________ pag. 5 PACKAGING ______________________________________________________________ pag. 6 PASSAGGIO CAVI __________________________________________________________ pag. 7 ISTRUZIONI DI MONTAGGIO _________________________________________________ pag. 3 MONTAGGIO SUPPORTO GARMIN _____________________________________________ pag. 9 CONTENTS GENERAL SAFETY INFORMATION ____________________________________________ pag. 14 WARRANTY _______________________________________________________________ pag. -
Page 4: General Safety Information
If any bicycle fall or accident occures, discontinue riding the bicycle and have it inspected carefully by an official Deda Elementi dealer or a qualified bicycle technician. The use of any damaged bicycle part can cause serious accidents and injury for the user. -
Page 5: Warranty
WARRANTY Deda Elementi warrants that all products are free from defects in materials or workmanship for a period of two years after original purchase unless otherwise stated on the Warranty policy. The Warranty is valid with the purchase of an original Deda Elementi products only. -
Page 6: Packaging
PACKAGING The product package you have just purchased contains the following parts: (1) Integrated handlebar (2) Headset compression screw M6x30 mm (3) Aero Top cap (4) Barrel-nut (5) Stem screw M5x22 mm, 2pz (6) 5 mm Aero spacer (Top spacer) (7) 10 mm Openable aero spacer (8) 20 mm Openable aero spacer (9) Aero headtube cover (Top cover 46 mm, for 1”1/8 bearing) -
Page 7: Cables Routing
CABLES ROUTING The Alanera MY 2020 is compatible both for external and full internal cable routing. TRADITIONAL FRAMESET In case of assembling on traditional frameset, cables will enter close to the levers and will go out from central holes. Here below a picture showing the cables passages. In this case the headset top cover of 46 mm could be used (9). - Page 8 DCR FRAMESET DCR frameset uses a fork with forktube 1” 1/8 and headset upper bearing of 1,5”. In this case the headset top cover of 56 mm (10) and compression ring of 1,5” (11) could be used. In order to use the complete internal cables routing, the frame and the fork have to be compatible.
- Page 9 UPPER BEARING POSITION: Upper bearing position has to observe following dimensions: In case of assembling on DCR frameset, cables will enter close to the levers and will go out under the stem, passing across the spacers, top cover of 56 mm (10) and compression ring (11).
- Page 10 WARNING: with this frameset, Alanera handlebar is compatible for the full internal cables routing just for electronic groups. “D-SHAPE” FORK FRAMESET This frameset has got an upper bearing of 1” 1/8 and a “D-shape” fork of 1” 1/8. In this case the headset top cover of 46 mm (9) could be used. In case of assembling on “D-shape”...
-
Page 11: Technical Specifications
TECHNICAL SPECIFICATIONS HEADSET COMPRESSION SCREW EXPANDER AERO TOP CAP MINIMUM GAP 3 mm MAX GAP 4 mm EXPANDER EXPANSION BOLT MAX TORQUE 3 Nm (internal screw) STEM SCREW MAX TORQUE 5 Nm FORK STEERER 5 mm AERO SPACER REQUIRED 10 mm OPENABLE AERO SPACER OPTIONAL 20 mm OPENABLE... - Page 12 3. Install the handlebar on the steerer tube. Loosen the rear stem screws so that the handlebar stem can slide along the fork steerer. WARNING: In case of full internal cables routing, please carry out the cables routing before proceeding to the next step. 4.
-
Page 13: Garmin Mount Installation
3. Check that the Garmin® mount has been correctly fixed before using your Garmin® computer. This model is compatible with 500 and 800 series. CONTACTS For any question or technical information please contact Deda Elementi by visiting the website at www.dedaelementi.com and through the email address info@dedaelementi.com. - Page 14 www.dedaelementi.com Dedaindustrie S.r.l. Via Leonardo Da Vinci 19/21/23 26010 Campagnola Cremasca (CR) - Italia Phone +39 0373 750 129 Fax +39 0373 751 105 www.dedaos.com.tw Deda OS No.8, Lane 150-30, Sec. 3, Xitun Rd., Xitun Dist. Taichung City 407, Taiwan (R.O.C.) tel: +886-4-24623436 fax: +886-4-24623430 *ALAIST18*...
Need help?
Do you have a question about the ALANERA 2020 and is the answer not in the manual?
Questions and answers