Rexel MERCURY RDS2050 Illustrated Parts List
  1. Manuals
  2. Brands
  3. Rexel Manuals
  4. Paper Shredder
  5. Mercury RDS 2050
  6. Illustrated parts list

Rexel MERCURY RDS2050 Illustrated Parts List

Hide thumbs Also See for MERCURY RDS2050:
Table of Contents

Advertisement

Quick Links

PAPER SHREDDER MERCURY
PAPER SHREDDER
MERCURY
RDS2050,RDX1750,RDS2270,RDX1970
ILLUSTRATED
PARTS LIST
Acco Service Division,
Halesowen Industrial Estate, Hereward Rise, Halesowen, West Midlands
B62 8AN
Telephone 0845 658 6600
Fax 0121 501 3991
D Mead Issue 1
Page 1 of 24
March 2007

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MERCURY RDS2050 and is the answer not in the manual?

Questions and answers

Related Manuals for Rexel MERCURY RDS2050

Summary of Contents for Rexel MERCURY RDS2050

  • Page 1 PAPER SHREDDER MERCURY PAPER SHREDDER MERCURY RDS2050,RDX1750,RDS2270,RDX1970 ILLUSTRATED PARTS LIST Acco Service Division, Halesowen Industrial Estate, Hereward Rise, Halesowen, West Midlands B62 8AN Telephone 0845 658 6600 Fax 0121 501 3991 D Mead Issue 1 Page 1 of 24 March 2007...
  • Page 2 PAPER SHREDDER MERCURY ILLUSTRATED PARTS MANUAL MERCURY SHREDDERS – 230 VOLTS TABLE OF CONTENTS Index Page 2 & 3 Preface Page 4 Machine Description Page 5 SPARES ASSEMBLIES Model RDS2050 S2 Pages 6 RDS2270 S2 Model RDX1750 S3 Page 7 RDX1970 S3 D Mead Issue 1 Page 2 of 24...

  • Page 3: Table Of Contents

    PAPER SHREDDER MERCURY TABLE OF CONTENTS COMT’D SERVICE INSTRUCTIONS. SECTION A. TO REMOVE CUTTING HEAD FROM CABINET Page 8. SECTION B. TO REMOVE TOP COVER FROM CUTTING HEAD. Page 9. SECTION C. TO ADJUST ANTI JAM MECHANISM. Page 10. SECTION D. TO REMOVE ANTI JAM MODULE. Page 10.

  • Page 4: Service Instructions

    PAPER SHREDDER MERCURY PREFACE SERVICE PREPARATION This manual provides the instructions for the replacement of all the components that may become worn or damaged during normal usage of the machine. “Illustrated Parts Lists” For each machine give full details of the replacement part numbers with supporting diagrams to show the location of the components.
  • Page 5 PAPER SHREDDER MERCURY DESCRIPTION A range of straight and crosscut shredders using either built up or solid shafts. ANTI JAM FEATURE All models include an anti jam feature if documents above a set thickness are fed into the infeed slot. The documents will not have entered the cutters.
  • Page 6 PAPER SHREDDER MERCURY MODEL RDS2050 S2 & RDS2270 S2 SPARES ASSEMBLIES Section Description Part No Comments Anti Jam Module. 1001336 Prong and Actuator 1001337 Assy. Paper Sensor Rear 1001338 Paper Sensor Front 1001338 Gear Kit 1001343 Including circlips Motor Capacitor 1001342 Motor 1001339...
  • Page 7 PAPER SHREDDER MERCURY MODEL RDX1750 & RDX1970 SPARES ASSEMBLIES Secti Description Part No Comments Anti Jam Module. 1001336 Prong and Actuator Assy. 1001337 Paper Sensor Rear 1001338 Paper Sensor Front 1001338 Gear Kit 1001344 Including circlips Motor Capacitor 1001342 Motor 1001340 RDX 1750 Motor...
  • Page 8 PAPER SHREDDER MERCURY REPAIR PROCEDURES FOR MODELS RDS2050 S2, RDS2270 S2, RDX1750 & RDX1970. A. TO REMOVE CUTTING HEAD FROM CABINET 1. Slide out waste bin and put to one side. 2. Ensure CD flap is in the position for shredding CDs. Fig 1. Fig 1 3.

  • Page 9: Section A. To Remove Cutting Head From Cabinet

    PAPER SHREDDER MERCURY B. TO REMOVE TOP COVER FROM CUTTING HEAD 1. Remove Cutting Head from Cabinet. See section A. 2. With the cutting head resting on its top surface. Remove 9, 5mm dia. and 2, 4mm dia. self tapping screws. Note position of screws. NOTE.

  • Page 10: Section C. To Adjust Anti Jam Mechanism

    PAPER SHREDDER MERCURY C. TO ADJUST ANTI JAM MECHANISM 1. Remove Cutting Head from Cabinet and Top Cover. Sections A and B. 2. Tighten or slacken the 4 adjusting screws. Fig 4. The mechanism is correctly set when the illuminated area around the feed slot is green when sheets of 70gsm paper, equal to the sheet capacity, are feed into the product.

  • Page 11: Section E. To Replace Prong And Actuator Assembly

    PAPER SHREDDER MERCURY E. TO REPLACE PRONG AND ACTUATOR ASSEMBLY 1. Remove Cutting Head from Cabinet, Top Cover and Anti jam Module. Sections A, B and D. 2. Lift rear of prong and spring assembly and remove. Fig 5. Fig 5 3.

  • Page 12: Section F. To Replace Rear Paper Sensor

    PAPER SHREDDER MERCURY F. TO REPLACE REAR PAPER SENSOR 1. Remove Cutting Head from Cabinet, Top Cover, Anti jam Module and Actuator Assembly. Sections A, B, D and E. 2. Unplug lead from socket on Main PCB, marked AUTO2A and thread lead through grommet in side frame.

  • Page 13: Section H. To Replace Gears

    PAPER SHREDDER MERCURY H. TO REPLACE GEARS 1. Remove Cutting Head from Cabinet and Top Cover. Sections A and B. 2. Remove Motor Capacitor Section I. 3. Unplug all leads from sockets on Main PCB, cut tie wraps. 4. Disconnect earth leads to from side frame. 5.
  • Page 14 PAPER SHREDDER MERCURY H. TO REPLACE GEARSCONT’D 9. Lift out cutting unit and rest on end allowing access to the gearbox cover screws. 10. Remove 6 screws securing gearbox cover to side frame and lift away cover. 11. Replace complete set of plastic and/or metal gears. Note. The gears fitted to RDS2050 S2 &...

  • Page 15: Section I. To Replace Motor Capacitor

    PAPER SHREDDER MERCURY I. TO REPLACE MOTOR CAPACITOR 1. Remove Cutting Head from Cabinet and Top Cover. Sections A and B. 2. Unplug lead from socket on Main PCB, marked TCO4 and cut tie wrap. 3. Remove nut and washer securing capacitor and remove. 4.

  • Page 16: Section L. To Replace Cd Flap

    PAPER SHREDDER MERCURY Switch PCB LED PCB Fig 12 CD Flap Inlet Socket L. TO REPLACE CD FLAP 1. Remove Cutting Head from Cabinet and Top Cover. Sections A and B. 2. Remove 8 outer screws holding illuminated infeed unit to top cover and lift out.

  • Page 17: Section M. To Replace Infeed Illumination Unit

    PAPER SHREDDER MERCURY M. TO REPLACE INFEED ILLUMINATION UNIT 1. Remove Cutting Head from Cabinet and Top Cover. Sections A and B. 2. Remove 4 screws and large washers locating leads. 3. Remove 3 screws securing LED PCB unit. 4. Unplug leads from sockets CNS1 and CNS2 on LED PCB. 5.

  • Page 18: Section P. To Replace Inlet Socket And Lead

    PAPER SHREDDER MERCURY P. TO REPLACE MAINS LEAD 1. 1. Remove Cutting Head from Cabinet and Top Cover. Sections A and B. 2. Unplug lead from main PCB marked POWER. 3. Remove screw securing earth lead to side frame. 4. Remove screw and large washer, from top cover, holding lead in place.

  • Page 19: Section R. To Replace Bin Full Sensors

    PAPER SHREDDER MERCURY R. TO REPLACE BIN FULL SENSORS 1. Remove Cutting Head from Cabinet and Top Cover. Sections A and B. 2. Unplug bin full sensor leads from sockets on main PCB marked BIN1A and BIN2A. 3. Remove 2 screws and large washers locating leads by side of cutting head.

  • Page 20: Flow Diagram - Operating Sequence

    PAPER SHREDDER MERCURY D Mead Issue 1 Page 20 of 24 March 2007...

  • Page 21: Logic Diagram

    PAPER SHREDDER MERCURY LOGIC FLOW CHART ALL MODELS D Mead Issue 1 Page 21 of 24 March 2007...
  • Page 22 PAPER SHREDDER MERCURY LOGIC FLOW CHART ALL MODELS CONT’D D Mead Issue 1 Page 22 of 24 March 2007...

  • Page 23: Wiring Diagram

    PAPER SHREDDER MERCURY WIRING DIAGRAM RDS2050, RDS2270, RDX1750 & RDX1970 D Mead Issue 1 Page 23 of 24 March 2007...

  • Page 24: Amendment Sheet

    PAPER SHREDDER MERCURY AMENDMENT RECORD SHEET ISSUE DECRIPTION SERIAL NO CARO NO Original D Mead Issue 1 Page 24 of 24 March 2007...

This manual is also suitable for:

Mercury rds2270Mercury rdx1970Mercury rdx 1750

Table of Contents