Advertisement
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with carrier.
Do not use Infrared Thermometer if broken, bent,
cracked or damaged parts (including labels) are noted.
Infrared Thermometer damaged in any way, operates
abnormally or is missing parts should be removed from
service immediately. If you suspect that the Infrared
Thermometer was subjected to a shock load (a load that
was dropped suddenly, unexpectedly, etc.) immediately
discontinue use until it has been checked by a factory
authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Infrared Thermometer under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain
that anyone that uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION
: Used without the safety alert symbol indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
Notes
: Provide clarity and helpful information.
WARNING
: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov.
10/18
2018 OEMTOOLS
™
NO CONTACT INFRARED
THERMOMETER
25245
Advertisement
Table of Contents
Summary of Contents for Oemtools 25245
- Page 1 Operating Instructions and Parts Manual 25245 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
- Page 2 Operating Instructions and Parts Manual 25245 NO CONTACT INFRARED THERMOMETER Thank you very much for choosing an OEMTOOLS 7. Don’t overreach. Keep proper footing and balance Product! at all times when operating this tool. 8. Check for damage. Check your tool regularly. If For future reference, please complete the owner’s...
- Page 3 Operating Instructions and Parts Manual 25245 NO CONTACT INFRARED THERMOMETER 21. Keep the handle dry, clean, and free from brake 29. The manufacturer declines any and all fluid, oil, and grease. responsibility for damage to vehicles or components if said damage is the result of 22.
-
Page 4: Product Specifications
Operating Instructions and Parts Manual 25245 NO CONTACT INFRARED THERMOMETER WARNING PRODUCT SPECIFICATIONS This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING (-58ºF to 716ºF) Temperature ACCIDENT AND INJURY: range (-50ºC to 380ºC) 1. Before you use this unit, check on the plastic housing carefully. -
Page 5: Lcd Display & Buttons
Operating Instructions and Parts Manual 25245 NO CONTACT INFRARED THERMOMETER Emissive: LCD display & buttons: Most organic materials and painted or oxidized 1. LCD display: surfaces have an emissive of 0.95 (pre-set in the unit). a. Data hold icon Inaccurate readings will result from measuring shiny b. - Page 6 If you find any defect in material or workmanship, through normal usage, return it to the place of purchase or to OEMTOOLS for repair or replacement at our discretion. In order to obtain this service send your tool and proof of purchase, transportation pre-paid, to OEMTOOLS Q.A. Dept., 3850 E. Raines Road #3, Memphis TN 38118.
Need help?
Do you have a question about the 25245 and is the answer not in the manual?
Questions and answers