Operating Instructions; Extending The Hose - Stanley BXGT10147E Installation, Use And Maintenance Manual

Operating Instructions

Caution: Always hold the hose until it
completely. retract into the hose reel

Extending the hose

1, Pull the hose out to the desired length. The hose will automatically lock in position
Anywhere lock: Pull out the hose to the desired length and then stop pulling so the reel can lock in the desired position.
2, To retract, pull out about 300mm of hose; the hose will retract back into the reel
Noted :
1, To retract, it is suggested that a minimum of 15" has been extended
2, During retraction, always hold on to the hose and follow the retraction until it is finished. Under no circumstances should
you let go of the hose as it will retract at a high speed potentially causing injury to any person standing nearby, and/or
damaging to the hose and hose reel.
3, When the hose is twisted, it is necessary to extend the hose to its full length, untwist the hose and then allow it to retract
Caution: The yellow tape marks the end
of the hose length.