Setting Up The Document Camera - Samsung SDP-850 Manual

Zoom In/Out
The Lamp button on the remote control turns the lamp
on and off.
When you press the [Freeze] button on the remote, the
projected image is held on the screen. This allows you
to replace the picture with another one or make
adjustments to the picture using your computer while
the projected view remains unchanged. Pressing the
[Freeze] button again releases the freeze mode.
Connect the headlamp to either arm of the document
camera. Connect the chord from the headlamp to the
power supply located on the back of the vertical arm.
To zoom in or out, press
the ZOOM + or – button
on the base of the
camera. (NOTE: On the
remote, the buttons are
labeled WIDE and
TELE.)

Setting up the Document Camera