Specifications - Gates Power Crimp 707 Safety And Operating Manual

Prod. No.:
Dimensions:
Weight:
Production Rate:
* Power Crimp 707 crimper can also be ordered wired for 230 volts (Prod. No. 7480-0046,
Part No 77701). Must be used with 230 volt power unit (Prod No. 7481-0028, Part No. 77811).
Prod. No.: 7481-0023 Part No.: 77810
Power Source: 115 Volt, 15 Amp.,
1 H.P., 60 Cycles
Dimensions: 12 " wide x 25" deep x 12" high
Weight: 70 lbs.
Maximum Rated Working Pressure: 4900 psi.
Note: Do Not operate 115V crimper with a 230V pump. Digital readout will be damaged. See page 11
for additional instructions.
23 Die sets are available for crimping hydraulic and industrial hose from
3 1
⁄ " through 1 ⁄ " I.D. A Swager Kit (Prod. No. 7480-0040, Part No. 78081)
1 6 4
also is available to swage thermoplastic and C14 Teflon hoses.
PC707 8-Finger Die Sets Available
Product
Description Number
Die Set 721 7482-1217
Die Set 722 7482-1218
Die Set 731 7482-0931
Die Set 732 7482-0932
Die Set 733 7482-0933
Die Set 734 7482-0934
Die Set 735 7482-0935
Die Set 736 7482-0936
Die Set 737 7482-0937
Die Set 739 7482-0939
Die Set 740 7482-0947
Die Set 741 7482-0941
Die Set 742 7482-0942
Die Set 743 7482-0943
Die Set 744 7482-0944
Die Set 745 7482-0945
Die Set 746 7482-0946
Die Set 781 7482-1231
Die Set 782 7482-1232
Die Set 783 7482-1233
Die Set 7C3 7482-1122
Die Set 7C4 7482-1123
Do not use 720 or 739 die set with notched die cone. May cause damage to die cone.
2

Specifications

®
Power Crimp
7480-0043*
13" wide x 12" deep x 26-1/2" high
188 lbs.
50 assemblies per hour (1/2" I.D. 2-wire
straight thread assemblies)
Electro Power Pump
Part
Number Notes
78943
78944
78931
78932
78933
78934
78935
78936
78937
78939 Must use the No-Notch Die Cone (Prod. No. 7482-0297, Part No. 78747)
78950 For crimping 6ACA
74951 For crimping 8ACA
78952 For crimping 10ACA
78953 For crimping 12ACA
78954 For crimping power steering
78955 For crimping grease fitting
78956 For crimping miscellaneous (Replaces B die)
78578 For GL Fittings
78579 For GL Fittings
78580 For GL Fittings
78941 For crimping clamp collar (
78942 For crimping clamp collar (
CAUTION:
707 Crimper
Part No.: 77700*
Prod. No.: 7481-0028* Part No.: 77811*
Power Source: 230 Volt, 7.5 Amp.,
1 H.P., 60 Cycles
* Use only with Power Crimp 707 (Product No. 7480-0046,
Part No. 77701), or 230 Volt rewired Power Crimp 707 crimper only.
5
⁄ ")
8
3
⁄ ")
4