Battery Charging; Charger Led Panel - Challenge CH18V2 Original Manual

Operation

Battery Charging

16
• Plug the charger into an appropriate AC power outlet.
• Insert the battery pack along the support rails of the charger (Fig. 16).
Do not use other battery chargers. The battery charger supplied is specifically designed for the lithium-ion
battery used in this garden appliance.
Check the mains voltage! The voltage of the power supply must correspond with the data on the
nameplate of the battery charger. Battery chargers operate on 220-240V AC.
Ensure the battery is charged between 4°C and 40°C. This ensures an optimum battery service life.
NOTE! The battery is supplied partially charged. To ensure full capacity of the battery, charge the
battery in the battery charger before using your appliance for the first time. The lithium-ion battery can
be charged at any time without reducing its service life. Interrupting the charging procedure does not
affect the battery.

Charger LED Panel

Preparation: The charging process starts as soon as the mains plug of the battery charger is plugged
into a mains socket and the battery is inserted into the charging compartment.
If the battery is not inserted, a continuous red light indicates that the mains plug is plugged into a
mains socket and the battery charger is ready for operation.
Charging: a flashing green LED on the charger indicates that the battery is charging normally.
Charged: continuous green LED on the charger indicates that the battery is ready for use.
After Sales Support 0343 515 1906 25