Learning Commands - Philips SBCRU960/05 User Manual

4 In the Device Overview, tap the Device for which you want to define
the brand.
A message screen appears.
5 Tap
The 'Brands' screen appears.
Searching the brand
1 Tap
The 'Searching the Brand' screen appears.
2 Tap
The 'Searching' screen appears. Pronto searches through the list of brands, by
sending out an IR code for each brand.
3 When the device for which you are defining the brand, turns off,
tap
The 'Installing the Brand' screen appears.
4 To install the brand and code set, follow the instructions described in
'Installing the brand' on page 21.

Learning Commands

If an IR code is not in the database, you can program Pronto commands by
transmitting IR signals from your existing remote control to Pronto's learning eye.
The Learn Tool allows you to learn a button
or a device action. A device action is an
action that is executed automatically when
you select a device. E.g. when you select TV,
your Pronto can learn to switch on the TV at
the same time. You can also use the Learn
Tool to relearn commands that do not work
properly.
Note
User Guide
23
.
in the 'Brands' screen.
and point Pronto at the device.
in the 'Searching' screen.
Changing the Brand in the Brand Tool
will not have an impact on the learned
codes.
Customizing Pronto
4 - 8 inches
10 - 20 cm
Learning
eye