MyPurMist Free Quick Start Manual

Quick start guide
1. First add Mypurmist water at the fill port in the
back. Twist the top o the water refill and insert
spout into the water fill port with the refill label
facing you. Squeeze repeatedly until empty. Do not
over fill - stop if water spills at fill port.
2. With water added, charge Mypurmist until
charge indicator light is green. Unplug charger.
The device will not operate while plugged in.
Typical charge time is 1.5-2 hours.
3.
Press ON and get instant ultrapure steam
therapy for superb relief! Anywhere, anytime.
4. Adjust steam temperature to your comfort by
pressing the temperature control button.

Helpful hints

Attach included Mypurmist scentpad at the air intake.
Press one reservoir to add soothing
eucalyptus and peppermint aroma. Enjoy!
Device goes into automatic drying mode for 10 min
for self cleaning when turned OFF or when it runs out
of water or battery. No maintenance needed.
Mypurmist Free is great for the whole family. Use
Mypurmist as often as needed. Typical use is two
sessions per day for 15 minutes each.
Mypurmist Free also works as an air purifier without
making steam. Toggle the temperature control to
white light only for cool purified air.
A steady red light in the water window on the rear
side means it is out of water. See user manual.
See Mypurmist.com or consult the User Manual for
additional information.
First add Mypurmist water.
Then charge device
for approx. 1.5-2 hours
Charge indicator light
No power Charging Charging Charging
HEPA
air-purifier ON
Temperature
control
(100°-115°F)
ON/OFF button
and battery
level indicator
mypurmist.com
Ready