IMPORTANT SAFEGUARDS READ THESE INSTRUCTIONS BEFORE USE. When using electrical appliances, there are precautions that need to be followed: 1 Make sure that the power voltage of the appliance corresponds to that of the mains power sys- - tem. 2 Do not leave the appliance unattended when connected to the mains power; disconnect it after each use.
Page 4
compromise the safety and performance of this appliance. 22 Do not allow the power cord to dangle from the edge of the table or work surface. Never place the power cord or the appliance on hot surfaces. 23 NEVER PLACE THE MOTOR UNIT, PLUG, OR POWER CORD IN WATER OR OTHER LIQUIDS;...
OPERATING INSTRUCTIONS WARNING: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE. - Place the motor base (F) on a flat, steady surface. Make sure that the surface is easy to clean. - Fit the filter holder (C) on the base (F).
- After use, disassemble the appliance before cleaning. WARNING: switch off the appliance and disconnect it from the electricity supply. - Rotate the locking bar (E) downwards and remove all parts following the assembly steps described previously – this time in reverse order. CLEANING AND MAINTENANCE WARNING: Before cleaning the appliance, make sure that it has been disconnected from the power supply.
Need help?
Do you have a question about the Centrika Metal 173 and is the answer not in the manual?
Questions and answers