English 14" MULTICUTTER DW872 Congratulations! Denotes risk of electric shock. You have chosen a D WALT tool. Years of experience, thorough Denotes risk of fire. product development and innovation make D WALT one of the most reliable partners for professional power tool users.
English use a power tool while you are tired or under the tool repaired before use. Many accidents are caused by influence of drugs, alcohol or medication. A moment poorly maintained power tools. of inattention while operating power tools may result in f ) Keep cutting tools sharp and clean.
English Fitting a Mains Plug to 115 V Units • Use correctly sharpened saw blades. Observe the maximum speed marked on the saw blade; (U.K. and Ireland Only) • Ensure that any spacers and spindle rings used are suitable for •...
English 5 Mounting holes 8. Move the guard back down and release the spindle lock WARNING: The teeth of a new blade are very sharp and Cutting table can be dangerous. Hex key Clamping the Workpiece in Position Intended Use Your professional D WALT multicutter has been designed for (Fig. A, C1–C6) the cutting of variously shaped metal materials: water and gas...
English Prior to Operation: 19 9 3. Push the clamp lever back down to the cutting table 7 to lock the fence (Fig. C1). • Install the appropriate cutting blade. Only use sharp or WARNING: If the clamp lever resistance is too light, correctly sharpened blades.
English Transporting (Fig. F) Optional Accessories 21 WARNING: Since accessories, other than those offered The tool is equipped with a lock-down pin which locks the tool in closed-down position for carrying. by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)