English - DeWalt DE0736 Instructions Manual

E N G L I S H
TRIPOD DE0736
Congratulations!
You have chosen a D WALT product. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional users.
Technical data
Threaded pin
Max. height
Weight
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Safety instructions
Always observe the safety regulations applicable
in your country to reduce the risk of fire,
electric shock and personal injury.
Read all of this manual carefully before operating
the attachment. Also refer to the manual of any
power tool that will be used with this attachment.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Keep children away
Do not let children come into contact with the
tool or extension cord. Supervision is required for
those under 16 years of age.
3 Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended.
5
DE0736.P65
Warning! The use of any accessory or
attachment or performance of any operation with
this tool, other than those recommended in this
instruction manual may present a risk of personal
injury.
Package contents
DE0736 The package contains:
5/8" x 11 1 Tripod
cm 173 1 Instruction manual
kg 5.2
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your DE0736 tripod has been designed to extend
the capabilities of your D
The tripod helps positioning the rotary laser on
rough and out-of-level surfaces. The attachment can
be used both indoor and outdoor.
Fig. A
1 Flat head mount
2 Quick-adjust latch
3 Leg
4 Foot bracket
5 Foot
Assembly and adjustment
Mounting a tool to the tripod (fig. B)
The tripod has been equipped with a threaded pin
for mounting of the DW073 rotary laser or any other
tool with the required ratings stated in the technical
data.
• Install the tripod on a relatively smooth and level
surface.
• Mount the tool to the tripod by turning the
threaded pin (6) into the receptacle in the base of
the tool.
• Adjust the tool as desired.
8
WALT rotary laser.
E
Also refer to the manual of the tool to be
used with this attachment.
28-06-2001, 09:28